Smart Soil Technology™

Smart Soil Technology and monitor 1x1 Web.png

Putting You in Control

The Smart Soil Technology™ ISOBUS control system provides a completely new way for operators to control their Excelerator® XT 8010 from the tractor cab. Available as an option on all folding Excelerator XT models.

Contact your dealer for pricing

Find a dealer near you

The Smart Soil Technology™ ISOBUS control system provides a completely new way for operators to control their Excelerator® XT 8010 from the tractor cab. Available as an option on all folding Excelerator XT models (20’, 25’, 30’, 34’ & 40’)

Adjust machine depth, front and rear gang angle, wing down pressure, Star Wheel™ pressure and front / rear leveling from any compatible ISOBUS display. Redundant sensors are fitted to gang angle and depth circuits for backup in case of failure, and a machine equipped with Smart Soil Technology can always be converted back to manual mode, so an electronics failure will not result in a machine down situation. A true plug and play solution despite tractor brand and with no additional compatibility hardware required.
CCI_1200_Action_01.jpg

Your benefits

Control from the Cab

Work Screen.jpg

Control from the Cab

All functions are easily controlled electronically from the ISOBUS display allowing the operator to fine tune the Excelerator® XT to match field conditions and working speed and view exact settings on the display. Front and rear gang angles can be adjusted simultaneously or independently for precise adjustment to suit field conditions and maintaining the same capabilities as Excelerator not equipped with Smart Soil Technology.

Ergonomic Comfort

When raising and lowering the machine on end rows or for transport, the operator still uses the tractor SCV control. This maximizes ergonomic comfort and familiarity for one of the most frequent operations.
Hand-on-tractor-control.jpg

Customizable Presets

SST_Presets.png

8 Customizable Presets

Operators can store favorite settings for all functions using 8 customizable presets and then quickly switch between them during operation. A preset only mode can be used where the customer wishes to limit the operator’s ability to adjust the machine only between predetermined settings.

AEF Certified

Kuhn AEF.png

AEF Certified

ISOBUS equipment certified by the AEF is included in the online database. The customer can verify compatibility of ISOBUS functions between the machine and the terminal to be used. A true plug and play solution despite tractor brand and with no additional compatibility hardware required.

Equipment

General-Visual-Electronics.jpg

Media