PS242trvb_01.png

Big Benefits in a Small Package

KUHN Knight PS 235 and 242 ProSpread® apron box spreaders are non-commercial spreaders that provide an affordable option for producers without sacrificing quality. With capacities of 275 and 360 ft³, these machines are ideal for small dairy, feeder, and cow/calf operations.

Contact your dealer for pricing

Find a dealer near you

KUHN Knight PS 235 and 242 ProSpread® apron box spreaders are non-commercial spreaders that provide an affordable option for producers without sacrificing quality. The PS 235 and PS 242 are designed for small dairy, feeder, and cow/calf operations that process a wide array of semi-solid and solid materials. An all-steel welded box construction and two-piece poly floor give you a machine that is built to last. Choose between horizontal and VertiSpread® vertical beaters to best fit the spreading needs of your operation. These spreaders, with heaped capacities of 275 and 360 ft³, feature a low loading height, are easy to maneuver around the farm and provide more efficient use of manure with exceptional spreading and metering capabilities.
PS242_Action_08.jpg

Your benefits

Built To Last

PS242_Action_01.jpg

All-Steel, Welded Construction

An all-steel construction provides the backbone and solid framework for these spreaders. This simple, yet effective design keeps the sides and beater panels aligned for the life of the machine. The side of the box is constructed using 10-gauge steel, creating a seamless construction which reduces wear and increases protection against side rust through. The all-welded construction includes a reinforced tongue that pulls directly from the axle for added strength and durability.

Two-Piece Poly Floor

A two-piece, ⅝” solid poly floor provides more strength and durability than individual tongue and groove boards while reducing friction. This means that less power is required for unloading versus alternative steel or wooden floors. The two-piece design allows for expansion or contraction with changing temperatures, and provides greater impact resistance when dropping heavy loads into the spreader. The plastic floor also reduces winter freeze-down issues to provide trouble-free service and long life.
PS242_PolyFloor.jpg

Dual-Apron Design

A dual apron provides consistent and reliable material flow to the beaters. This design also results in greater rigidity and longevity for both the apron chains and slats. You have the choice of T-bar or 667X pintle apron chain.
PS242_ApronChain.jpg

Hydraulic Apron Drive

A hydraulically driven apron means fewer moving parts to worry about. This system provides independent operation of the beaters and apron, resulting in even, controlled spreading of many different types of solid materials and allows you to easily achieve targeted application rates. An overload relief valve is mounted directly to the hydraulic motor for built-in protection of the apron drive.
PS242_HydraulicDriveMotor_01.jpg

Center-Mounted Driveline

This simple design eliminates the need for extra chains and sprockets that are necessary for a side-mounted driveline. This design also provides extra protection against accidental damage during use.
PS242_HB_BeaterDrive_01.jpg

Choice of Beaters to Match Your Spreading Needs

PS242_HorizontalBeaters_02.jpg

Horizontal Beaters

Horizontal beaters continue the classic design from KUHN Knight’s beginning. Horizontal beaters work well with a variety of materials and allow heavy application rates at higher speeds since the spread pattern is narrower. Standard with one 26” beater. An additional 14” upper beater and 10” lower beater are available for increased material breakup.

VertiSpread® Vertical Beaters

VertiSpread® vertical beaters provide quality spreading performance for a wider variety of dry materials, from tough materials like pen pack, to finer materials like dry dirt compost. They can provide the same fast unloading and high application rates as horizontal beaters, but with a wider spread pattern and more consistent material breakup.

Heavy-duty, 3/8” thick beaters provide a wide, consistent spread pattern. All beaters are equipped with bolt-on teeth which makes maintenance and replacement easy. Beater teeth can be upgraded to heavy-duty, heat-treated teeth to increase durability and longevity. Power to the beaters is routed through a fully enclosed, integral gearbox, providing a strong and reliable power supply with low maintenance requirements. For greater machine versatility, VertiSpread vertical beater modules are removable for safe storage while stockpiling or for other use.
PS242_VerticalBeaters.jpg

Tailor Your Machine

PS235_242_Endgates.jpg

Swinging & Guillotine Endgates

A traditional swinging endgate provides material control, ensuring that no material is lost during loading or travel. The guillotine endgate provides excellent metering capability for operators who want better control over their manure application. Guillotine endgate only available on PS 242 units ordered with VertiSpread Module.

Axle & Tire Options

A wide selection of axle and tire options allows purchasers to specifically tailor a unit to their operational needs. The PS 235 has an 8-bolt single, 10-bolt single and an 8-bolt tandem axle available. The PS 242 comes standard with an 8-bolt tandem axle.
PS242_Axle_03.jpg

Equipment

PS235_Action_01.JPG

Specifications

 PS 235 Horizontal TrailerPS 235 Vertical TrailerPS 242 Horizontal TrailerPS 242 Vertical Trailer
OVERALL HEIGHT
Tire Option Used 16.5L x 16.1 16.5L x 16.1 16.5L x 16.1 16.5L x 16.1
With Beaters 82" (208 cm) 91" (231 cm) 83" (211 cm) 91" (231 cm)
With Hydraulic Endgate 69" (175 cm) 69" (175 cm) 75" (185 cm) 83" (211 cm)
Front Extension / Cab Shield - 104" (264 cm) - 109" (277 cm)
SPECIFICATIONS
MAXIMUM NET LOAD
CAPACITY
BEATERS
BEATER PTO DRIVE
APRON
BOX AND TRAILER CONSTRUCTION

Media