GF 1012 Series Mounted Tedders


Exceptional Tedding Across the Entire Field

With 8 or 10 small-diameter rotors, and working widths of 28’7” or 35’5”, KUHN GF 1012 large, mounted rotary tedders, combine ideal characteristics for high-quality work, overall efficiency, time savings, and great forage quality.

Contact your dealer for pricing

Find a dealer near you

KUHN GF 1012 Series mounted rotary tedders, with working widths of 28’7” or 35’5”, are ideal for both custom operators and large acreage hay producers. These machines provide exceptional tedding quality, resulting in a crop that is fully tedded over the entire width, and is efficiently and uniformly spread to maximize drying. Reduced drying times result in higher quality and nutritional value in hay and haylage.

The small rotors are the secret to rapid drying, excellent ground following and low incorporation of impurities in the crop, helping maintain maximum forage quality. The exclusive DigiDrive® coupling system provides low maintenance, long life and increased safety. These machines feature KUHN’s Headland Lift Control system, making them easy to lift and maneuver on headlands, while limiting the introduction of foreign materials like dust into the forage. Despite the wide dimensions at work, these machines are incredibly compact in transport. Their 9’10” transport width is a considerable asset when accessing the narrowest fields and also provides safety and comfort during over-the-road travel.

Your benefits

Fast and Uniform Crop Drying and Distribution


Small-Diameter Rotors

For those whose goal is to harvest the highest quality crop – Small rotors are the key to success! Due to the steep pitch angle, small rotors offer many advantages, including a wide angle of attack while turning all of the crop, fast and uniform drying, complete crop inversion, even crop distribution, exceptional ground adaptation, minimum distance to the center of gravity on mounted tedders for reduced lift requirements, and reduced horsepower requirements.

High-Quality Tines

When it comes to tines that actually engage the crop, KUHN leaves nothing to chance: top-quality raw material has been wound into four coils with long tine fingers, giving you exceptional reliability. A defined attachment system to the arms results in an unmatched design life of at least 180,000 cycles. This provides several hundred hours of work before tine replacement is necessary. Asymmetrical tine finger length means both fingers engage the crop equally for a more consistent pickup. The tine guards prevent accumulation of debris around the coils.

Asymmetrical Tine Length

The asymmetrical tine length with longer outer fingers has several advantage to bring the machine’s tedding quality to perfection. This allows the outer finger to touch the crop earlier compared to symmetrical tines. It also ensures more complete tedding, along borders and between the rotors, where the tines overlap more in this sensitive area. Contacting the crop sooner means that the actual working width of each rotor is expanded and as a result, the entire machine working width is expanded.

Headland Lift Control

Headland Lift Control makes tedders easy to lift and maneuver on headlands while limiting the introduction of foreign materials like dust into the forage. This is beneficial because the headlands do not need to be tedded twice. One hydraulic valve in the cab lifts all the rotors from the ground providing high ground clearance to pass over windrows (approx. 20”) and allows operators to easily turn on headlands or narrow areas. Optional on GF 8712, Standard on GF 10812.

Proven & Reliable Components"


DigiDrive® Coupling System – A Legend in the Making

When a KUHN engineer came up with this drive coupling design, we knew that it would revolutionize the rotary tedder. This patented design made it possible to reliably drive a large number of rotors, yet fold them for unmatched transport ease, all with virtually no maintenance or repairs. Since the DigiDrive coupling’s inception, nearly 20 years have passed and more than 150,000 KUHN tedders are now being used across the world to ted hay with the ultimate reliability.

The DigiDrive contains case-hardened forged steel fingers for improved wear resistance. Synchronization of rotational movement is outstanding both in work and in transport where the components are folded 180° to reduce the machine’s space requirement. The DigiDrive is a highly reliable system requiring very little maintenance – no daily greasing necessary!

Rotor Housings – Made to Last

With rotors driven by DigiDrive couplings and lubed-for-life rotor housings, the greasing points are limited to a relatively few pivot points allowing you to spend more time in the field and less time greasing.
  1. They are supported by large diameter, double-row angular ball bearings.
  2. The thoroughly sealed rotor housing prevents lubricant leaks or introduction contaminants.
  3. The robust mounting of housings to the edge of the rectangular frame maximizes strength and durability.

Exclusive Suspension System

With the GF 1012 Series tedders, you will benefit from an exclusive and patented suspension system, which combines the advantages of powerful springs with those of hydraulic suspension.
  • The hydraulic suspension stabilizes the machine when maneuvering on headlands, no matter the field conditions. The tedder automatically and smoothly returns to the center, when it is lifted, due to the two large shock absorbers.
  • Integrated springs enhance the machine’s flexibility at the same time, always keeping it in the best working position.
  • The integrated rubber mounts absorb shocks on rough roads, while the absorbers control the machine movements.
The whole system provides exceptional suspension and driving comfort. Even when braking suddenly in turns, the rotors remain stable and carefully aligned behind the tractor. You will appreciate this with ever increasing tractor speeds.


The headstock has been tried and tested through years of experience. It is particularly suitable for this size of machine and features sturdy construction, effective recentering on slopes and reduced overhang.

Match your Crop and Field Conditions


Offset Border Tedding Along Field Edges

For clean, careful tedding next to fences or neighboring fields, GF 1012 Series tedders are equipped with a border control system. On slopes, the border setting is particularly beneficial for controlling the direction of crop spread and obtaining an optimal spread pattern.

 Optional on mounted rotary tedders and standard on trailed rotary tedders up to 35’5”, the offset border control setting is controlled hydraulically for absolute comfort. A double-acting cylinder, with pilot-operated valves, ensures safe functioning without risk of unwanted movement. On slopes, the offset border setting is particularly beneficial for controlling the direction of crop spread and obtaining an optimal spread pattern.

Quick Adjustment of Tine Angle

Whether in long or short, wet or dry crop, or different cutting heights, the pitch angle is adjusted without tools near the wheel supports. Always remember a steep pitch angle will decrease drying time and increase the nutritional value of the forage.

Ground Following

The ground following on these tedders matches that of smaller sized models in the GF Series. These machines have excellent ground following with their small rotors that are each 5’ in diameter, which allows for uniform tedding across the whole field. There is individual articulation between each rotor and equal spacing between the rotors and tires for better ground following.

Folding System for Narrow Transport

The folding system allows the transport wheels to lower and combine with the rotors tilting forward. While in transport position, height is reduced, load distribution on the tractors is optimal and road transport at high speeds is ideal. The incredibly narrow transport width of 9’10”, results in easy maneuverability and stable road transport.

Crop Deflectors

Operating in short, sticky crops or long, late season crops can be a challenge when the crop wraps in the wheel column, resulting in frustrating downtime spent clearing the mess. These tedders are fitted with crop deflectors as standard.



Working width DIN
Overall width in operating position
Number of rotors
Number of tine arms per rotor
Manual tine angle adjustment per rotor
Border control
Safety guards
Safety chains
Transport width
Transport height
Transport length
Hydrualic vertical folding
Automatic transport leveling
DigiDrive multiple finger drive coupling
PTO with torque limiter
PTO speed
Overruning PTO clutch
Tires on central rotors
Tires on outside rotors
Transport tires
Hitch type
Required tractor hydraulic connections
Minimum PTO power requirement
Frame dampener set
Road lights and signaling
Standard control box
Machine weight, approx.
GF 8712 GF 10812
28'7'' (8.7 m) 35'5'' (10.8 m)
30' (9.1 m) 36'9'' (11.2 m)
8 10
6 6
Standard Standard
Optional- Hydraulic offset border tedding Optional- Hydraulic offset border tedding
Standard Standard
- -
9'10'' (3.0 m) 9'10'' (3.0 m)
10'8'' (3.3 m) 11'10'' (3.6 m)
7'9" (2.36 m) 7'9" (2.36 m)
Standard Standard
- -
Standard Standard
Standard Standard
540 rpm 540 rpm
Standard Standard
18 x 8.50-8 18 x 8.50-8
16 x 6.50-8 16 x 6.50-8
- -
3-point, Cat. 2 3-point, Cat. 2
1 DA 1 DA
50 hp (38 kW) 55 hp (40 kW)
Standard Standard
Standard Standard
- -
3,042 lbs (1,380 kg) 3,570 lbs (1,620 kg)


Available applications:

Logo KUHN ForageXpert

KUHN ForageXpert

For a powerful forage harvesting chain. This new application is available to help you find mowers, mower conditioners, tedders and rakes best adapted to your needs. It will help you optimize forage harvesting according to your current or future equipment purchases.
Download on the App Store

Check all our other KUHN apps to optimize your farm and your life

Get it on Google Play