GF 1002 T Series Trailed Tedders


A Design that Makes a Difference

Easy and comfortable to transport, these large trailed rotary tedders are well suited for small to medium sized tractors. Ranging from 17’1” to 25’7” KUHN tedders are easy to use and highly reliable while also having low fuel consumption.

Contact your dealer for pricing

Find a dealer near you

KUHN GF 1002 T Series trailed tedders are designed to meet the needs of hay producers who demand the highest quality tedding of forage to ensure even and quick drydown. The GF 7902 T GII, with small-diameter rotors, is designed to excel at spreading short, thick crops and speed up drydown. While the GF 5202 THA, 7802 THA and 7802 T GII, with slightly larger-diameter rotors, excel at spreading long, dense crops. The exclusive DigiDrive® coupling system provides low maintenance, long life and increased safety. The comfortable transport, ease of use and long life of these machines are just a few of the additional benefits.

Your benefits

Fast and Uniform Crop Drying and Distribution


High-Quality Tines

When it comes to tines that actually engage the crop, KUHN leaves nothing to chance: top-quality raw material has been wound into four coils with long tine fingers, giving you exceptional reliability. A defined attachment system to the arms results in an unmatched design life of at least 180,000 cycles. This provides several hundred hours of work before tine replacement is necessary. Asymmetrical tine finger length means both fingers engage the crop equally for a more consistent pickup. The tine guards prevent accumulation of debris around the coils.

Asymmetrical Tine Length

The asymmetrical tine length with longer outer fingers has several advantage to bring the machine’s tedding quality to perfection. This allows the outer finger to touch the crop earlier compared to symmetrical tines. It also ensures more complete tedding, along borders and between the rotors, where the tines overlap more in this sensitive area. Contacting the crop sooner means that the actual working width of each rotor is expanded and as a result, the entire machine working width is expanded.

Two Rotor Designs

Choose between two rotor designs, depending on the windrow or swath width, or type of crop. The 7902 T GII features small-diameter rotors and is ideal for high-quality output. The small-diameter rotors ensure excellent tedding and are the key to fast drying, excellent ground adaptation and less impurities in the forage. Thanks to the steep pitch angle, the crop is fully turned over and well aerated for ultra-fast drying. The GF 7902 T GII tedder has eight rotors, each with five tine arms.

The GF 5202 THA, 7802 THA and 7802 T GII, featuring four to six rotors with seven tine arms each, are ideal for spreading three large swaths produced by a 10’ mower. The larger rotors excel at handling long and heavy crop.

Quick Adjustment of Tine Angle

Whether in long or short, wet or dry crop, or different cutting heights, the pitch angle is adjusted without tools near the wheel supports. Always remember a steep pitch angle will decrease drying time and increase the nutritional value of the forage.

Offset Border Tedding Along Field Edges

For clean, careful tedding next to fences or neighboring fields, GF 1002 T GII tedders are equipped with a border control system. On slopes, the border setting is particularly beneficial for controlling the direction of crop spread and obtaining an optimal spread pattern. On the GF 7802 T GII and 7902 T GII models, this setting is controlled hydraulically for absolute comfort. Simply activate a control valve and the machine is ready to work in border mode to the left or right.

Proven & Reliable Components"


DigiDrive® Coupling System – A Legend in the Making

When a KUHN engineer came up with this drive coupling design, we knew that it would revolutionize the rotary tedder. This patented design made it possible to reliably drive a large number of rotors, yet fold them for unmatched transport ease, all with virtually no maintenance or repairs. Since the DigiDrive coupling’s inception, nearly 20 years have passed and more than 150,000 KUHN tedders are now being used across the world to ted hay with the ultimate reliability.

The DigiDrive contains case-hardened forged steel fingers for improved wear resistance. Synchronization of rotational movement is outstanding both in work and in transport where the components are folded 180° to reduce the machine’s space requirement. The DigiDrive is a highly reliable system requiring very little maintenance – no daily greasing necessary!

Rotor Housings – Made to Last

With rotors driven by DigiDrive couplings and lubed-for-life rotor housings, the greasing points are limited to a relatively few pivot points allowing you to spend more time in the field and less time greasing.
  1. They are supported by large diameter, double-row angular ball bearings.
  2. The thoroughly sealed rotor housing prevents lubricant leaks or introduction contaminants.
  3. The robust mounting of housings to the edge of the rectangular frame maximizes strength and durability.

Crop Deflectors

Operating in short, sticky crops or long, late season crops can be a challenge when the crop wraps in the wheel column, resulting in frustrating downtime spent clearing the mess. These tedders are fitted with crop deflectors as standard.

Comfortable Transport


Folding System

The folding system allows the transport wheels to lower and combine with the rotors tilting forward. While in transport position, height is reduced, load distribution on the tractors is optimal and road transport at high speeds is ideal. The incredibly narrow transport width of 9’10” and the wide transport undercarriage combine for easy maneuverability and stable road transport.

Auto Tine Height Control

When folding into the transport position, the tines automatically raise off of the ground for more clearance with the road. When unfolding into working position, the tines will reset to the working height the operator previously set. GF 5202 THA and 7802 THA only.

Standard Drawbar Hitch & Heavy-Duty Chassis

The GF 1002 T Series tedders all come standard with a drawbar hitch for simple and easy attachment. The heavy-duty chassis provides users with a fast and secure method of transport.

Transport Wheels

By locating the transport undercarriage in front of the rotors, on GF 7802 T GII / 7902 T GII models, only part of the weight is sustained by these central wheels, the rest is absorbed by the drawbar and the tractor.

The spindles and tires on the central rotors of the GF 5202 THA and GF 7802 THA are stronger and larger in diameter to accommodate for transport from field to field.



Working width DIN
Overall width in operating position
Number of rotors
Number of tine arms per rotor
Manual tine angle adjustment per rotor
Border control
Safety guards
Safety chains
Transport width
Transport height
Transport length
Hydrualic vertical folding
Automatic transport leveling
DigiDrive multiple finger drive coupling
PTO with torque limiter
PTO speed
Overruning PTO clutch
Tires on central rotors
Tires on outside rotors
Transport tires
Hitch type
Required tractor hydraulic connections
Minimum PTO power requirement
Frame dampener set
Road lights and signaling
Standard control box
Machine weight, approx.
GF 5202 THA GF 7802 THA GF 7802 T GII GF 7902 T GII
17'1'' (5.2 m) 25'7" (7.8 m) 25'7" (7.8 m) 25'7" (7.8 m)
19'8'' (6.0 m) 29' (8.9 m) 27'5" (8.4 m) 26'6" (8.1 m)
4 6 6 8
7 7 7 5
- - Standard Standard
- - Hydraulic offset border tedding Hydraulic offset border tedding
Standard Standard Standard Standard
Standard Standard Standard Standard
9'10'' (3.0 m) 9'10'' (3.0 m) 9'10" (3.0 m) 9'10" (3.0 m)
9'2" (2.8 m) 10' (3.1 m) 11'4" (3.5 m) 10'2" (3.1 m)
9'2" (2.8 m) 9'10" (3.0 m) 15'9" (4.8 m) 14'9" (4.5 m)
Standard Standard Standard Standard
Standard Standard Standard Standard
Standard Standard Standard Standard
Standard Standard Standard Standard
540 rpm 540 rpm 540 rpm 540 rpm
Standard Standard Standard Standard
18 x 8.50-8 18 x 8.50-8 16 x 9.50-8 16 x 9.50-8
18 x 8.50-8 16 x 6.50-8 16 x 6.50-8 16 x 6.50-8
- - 10.0/80-12 10.0/80-12
Drawbar Drawbar Drawbar Drawbar
1 DA 1 DA 2 DA 2 DA
20 hp (15 kW) 35 hp (26 kW) 45 hp (34 kW) 45 hp (34 kW)
- - - -
Optional Standard Standard Standard
- - - -
1,170 lbs (530 kg) 1,874 lbs (850 kg) 3,075 lbs (1,395 kg) 3,340 lbs (1,515 kg)


Customer Spotlight: GF 1002 T

  • Andre Kammrath-Bartels's KUHN GF 7802 THA tedder
    Andre Kammrath-Bartels Sundre, Alberta

    "We had a very heavy hay crop during the 2019 season. We considered hiring a custom guy to silage bale it, but we did a demonstration of a KUHN GF 7802 THA rotary tedder and bought it. This tedder spreads swaths evenly and drydown is quick!"

All the testimonials

Available applications:

Logo KUHN ForageXpert

KUHN ForageXpert

For a powerful forage harvesting chain. This new application is available to help you find mowers, mower conditioners, tedders and rakes best adapted to your needs. It will help you optimize forage harvesting according to your current or future equipment purchases.
Download on the App Store

Check all our other KUHN apps to optimize your farm and your life

Get it on Google Play