4835 In-Line Ripper

4835 sil w shadow.png

Retain Residue, Remove Compaction

The 4835 in-line ripper provides efficient compaction removal, while allowing crop residue to remain virtually undisturbed on the surface. Working widths ranging from 24’ to 27’6”, and a variety of shank and point options are available to meet your agronomic needs.

Contact your dealer for pricing

Find a dealer near you

The KUHN Krause 4835 in-line ripper is the ideal tool to fight soil compaction, one of the leading causes of yield reduction. With working depths of 8” to 16”, the 4835 provides aggressive soil fracturing, while retaining valuable crop residue on the field surface. This allows for greater root development and water infiltration into the soil, and effectively reduces runoff and soil erosion. KUHN Krause 4835 in-line rippers are available in folding 8-, 9- or 11-shank models. 8- shank spacing choices include 36”, 38” and 40”, while 9- and 11-shank folding models offer 30” spacing. The unique horizontal fold configuration makes transport and storage more convenient. The 4835 can be equipped with spring reset shanks or rigid, shear-bolt protected shanks for soils where rock is not a concern. A variety of points are available depending on your agronomic needs.
4835Ripper_Action_01_MAW.jpg

Your benefits

3-Point or Pull-Type Configurations

KUHN Krause 4830 in-line ripper on white background

3-Point Hitch

Designed for deep tillage with strength and durability in mind. This Category IV, 3-point hitch is integrated into a two-bar frame design with main members of heavy-duty, 6”x6” structural steel tubing.

Rear Lift Drawbar Pull-Hitch

The optional drawbar pull-hitch lets you match tractors, not equipped with 3-point hitches, to the 4835 in-line ripper. The drawbar pull-hitch includes (4) 280/70 R15 tires on the rear lift and (2) 280/70 R15 front mounted gauge wheel tires.
4835 sil w shadow.png

Shank Mounts to Match Your Field Conditions

4830_ShearBoltShankMount.png

Shear-Bolt

Rigid, shear-bolt mounts are an economical choice for soils where rocks or other obstacles are not a concern.  Shear-bolt protection guards against shank damage from unexpected obstacles.
  • Shear force: 10,000 pounds (approximate)
  • 16” maximum shank working depth
  • For non-rock conditions

Spring Reset

Recommended for field conditions where obstacles or rocks may be encountered. A 4”x4” welded tube provides strength.
  • 2,500 pound point load
  • 20” trip height
  • 16” maximum shank working depth
  • 36” underframe clearance
4830_SpringResetShankMount.png

PathFind’R™

Exclusive pivoting design allows the shank to deflect up to 6 degrees on each side for a total of 12 degrees of movement.
  • Basic spring reset design
  • Makes deep ripping possible on contours or terraces
  • Deflects impacts improving performance in rocky soils
  • Smoother steering under full power with tracked tractors
  • Reduces stress on implement frame and 3-point tractor hitch
  • Not compatible with pull-type hitch
  • 20” trip height
  • 16” maximum shank working depth
  • 36” underframe clearance
PathFindrShank_4830Ripper.png

Shank & Point Options

Field pic for MRD.jpg

MRD Shanks, Points and Wings (Minimum Residue Disturbance)

Choose from a variety of MRD shank points and wings to achieve optimum residue level and surface appearance.
  • 1-1/4” Profile
  • Austempered ductile, reversible wear bar
  • Welded chromium carbide side plates

2” Chromium Carbide Point

5” Shattering Wing
  • Residue remaining: 51% to 65%
  • Fracture: 36% to 52%
Low-Disturbance Shank Cap
  • Residue remaining: 51% to 65%
  • Fracture: 31% to 48%
2inchChromiumCarbidePoint_Ripper4830.png

¾” Chromium Carbide Point

5” Shattering Wing
  • Residue remaining: 68% to 75%
  • Fracture: 36% to 52%
 Low-Disturbance Shank Cap
  • Residue remaining: 68% to 75%
  • Fracture: 31% to 48%
3/4" chromium carbide point with 5" shattering wing on left and with a low-disturbance shank cap on the right

2” Hard Surface Point

  • Best performance for rocky conditions
  • Residue remaining: 51% to 65%
  • Fracture: 31% to 48%
HardSurfacePoint_Ripper4830.png

Standard No-Till Shank, Points and Wings

The no-till point and 8” wing break up the compacted soil layer, while the narrow ¾” shank slips through the soil leaving up to 86% residue on the surface. With replaceable wear parts, this no-till design offers lower operation cost versus competitors.
  • ¾” profile
  • High-tensile steel shank
  • Austempered or chromium carbide points, wings and wear bar
  • Chromium carbide side plates
  • Residue remaining: Up to 86%
  • Fracture: 55% to 70%
  • Replaceable wear parts
  • Optional 2" chromium carbide point with low-disturbance shank cap
NoTillPoints_Ripper4830.png

Equipment

MAW_4830_Action06.jpg

Specifications

SPECIFICATIONS
 
Transport Width (ft/m)
Frame Type
Number of Shanks
Shank Spacing (in/cm)
Working Width (ft/m)
Spring Reset Shank Approximate Weight (lb /kg)
Shear Bolt Shank Approximate Weight (lb/kg)
4835-836F4835-838F4835-840F4835-930F4835-1130F
14'5" / 4.4 m14'5" / 4.4 m14'5" / 4.4 m14'5" / 4.4 m14'5" / 4.4 m
NEW Heavy-Duty Toolbar
6" x 6" Double Rank Toolbar
NEW Heavy-Duty Toolbar
6" x 6" Double Rank Toolbar
NEW Heavy-Duty Toolbar
6" x 6" Double Rank Toolbar
NEW Heavy-Duty Toolbar
6" x 6" Double Rank Toolbar
NEW Heavy-Duty Toolbar
6" x 6" Double Rank Toolbar
888911
36" / 91.4 cm38" / 96.5 cm40" / 101.6 cm30" / 76.2 cm30" / 76.2 cm
24' / 7.3 m25'4" / 7.7 m26'8" / 8.1 m22'6" / 6.8 m27'6" / 8.4 m
8,464 / 3 8398,464 / 3 8398,464 / 3 8398,813 / 3 99810,217 / 4 634
6,851 / 3 1086,851 / 3 1086,851 / 3 1086,993 / 3 1727,992 / 3 625
STANDARD EQUIPMENT
 
Hitch Type
Coulter Blades
Shank Mount
Shanks
Points
Shattering Wing
Depth Control
Gauge Wheels
Transport Locks and Safety
4835-836F4835-838F4835-840F4835-930F4835-1130F
Large Frame: CAT 3, 4N, and 4 Compatible with Parking StandsLarge Frame: CAT 3, 4N, and 4 Compatible with Parking StandsLarge Frame: CAT 3, 4N, and 4 Compatible with Parking StandsLarge Frame: CAT 3, 4N, and 4 Compatible with Parking StandsLarge Frame: CAT 3, 4N, and 4 Compatible with Parking Stands
22" x ¼" Smooth, 450 lb (250 kg) Down Pressure22" x ¼" Smooth, 450 lb (250 kg) Down Pressure22" x ¼" Smooth, 450 lb (250 kg) Down Pressure22" x ¼" Smooth, 450 lb (250 kg) Down Pressure22" x ¼" Smooth, 450 lb (250 kg) Down Pressure
Spring Reset: 2,500 lb Point Load, 20" Trip HeightSpring Reset: 2,500 lb Point Load, 20" Trip HeightSpring Reset: 2,500 lb Point Load, 20" Trip HeightSpring Reset: 2,500 lb Point Load, 20" Trip HeightSpring Reset: 2,500 lb Point Load, 20" Trip Height
No-Till Shank, 3/4" Thick (Very Low Surface Disturbance), Autempered Wear Bar, Chromium Carbide Shank Side ProtectorsNo-Till Shank, 3/4" Thick (Very Low Surface Disturbance), Autempered Wear Bar, Chromium Carbide Shank Side ProtectorsNo-Till Shank, 3/4" Thick (Very Low Surface Disturbance), Autempered Wear Bar, Chromium Carbide Shank Side ProtectorsNo-Till Shank, 3/4" Thick (Very Low Surface Disturbance), Autempered Wear Bar, Chromium Carbide Shank Side ProtectorsNo-Till Shank, 3/4" Thick (Very Low Surface Disturbance), Autempered Wear Bar, Chromium Carbide Shank Side Protectors
1-¾" Austempered Ductile Points (No-Till Shanks Only)1-¾" Austempered Ductile Points (No-Till Shanks Only)1-¾" Austempered Ductile Points (No-Till Shanks Only)1-¾" Austempered Ductile Points (No-Till Shanks Only)1-¾" Austempered Ductile Points (No-Till Shanks Only)
8" Austempered Shattering Wings8" Austempered Shattering Wings8" Austempered Shattering Wings8" Austempered Shattering Wings8" Austempered Shattering Wings
Ratchet Jack Adjustable Gauge WheelsRatchet Jack Adjustable Gauge WheelsRatchet Jack Adjustable Gauge WheelsRatchet Jack Adjustable Gauge WheelsRatchet Jack Adjustable Gauge Wheels
(2) 20.5" x 8", Load Range E(2) 20.5" x 8", Load Range E(2) 20.5" x 8", Load Range E(2) 20.5" x 8", Load Range E(2) 20.5" x 8", Load Range E
Slow Moving Vehicle Sign, High Visibility LED Transport Light KitSlow Moving Vehicle Sign, High Visibility LED Transport Light KitSlow Moving Vehicle Sign, High Visibility LED Transport Light KitSlow Moving Vehicle Sign, High Visibility LED Transport Light KitSlow Moving Vehicle Sign, High Visibility LED Transport Light Kit
OPTIONAL EQUIPMENT
 
Hitch Type
Shank Mount
Shank Mount
Shanks
Shanks
Points
Points
Points
Shank Cap
Wing Gauge Wheels
Closing Wheels
Shank Stagger Kit
4835-836F4835-838F4835-840F4835-930F4835-1130F
Drawbar Pull Hitch with Rear Lift Wheels, Includes (4) 280/70R15" Tires, Duals, (2) 280/70R15" Front Mounted Gauge Wheels, (1) 4" x 16" and (1) 4-½" x 16" Cylinder, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (Less Parking Stands)Drawbar Pull Hitch with Rear Lift Wheels, Includes (4) 280/70R15" Tires, Duals, (2) 280/70R15" Front Mounted Gauge Wheels, (1) 4" x 16" and (1) 4-½" x 16" Cylinder, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (Less Parking Stands)Drawbar Pull Hitch with Rear Lift Wheels, Includes (4) 280/70R15" Tires, Duals, (2) 280/70R15" Front Mounted Gauge Wheels, (1) 4" x 16" and (1) 4-½" x 16" Cylinder, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (Less Parking Stands)Drawbar Pull Hitch with Rear Lift Wheels, Includes (4) 280/70R15" Tires, Duals, (2) 280/70R15" Front Mounted Gauge Wheels, (1) 4" x 16" and (1) 4-½" x 16" Cylinder, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (Less Parking Stands)Drawbar Pull Hitch with Rear Lift Wheels, Includes (4) 280/70R15" Tires, Duals, (2) 280/70R15" Front Mounted Gauge Wheels, (1) 4" x 16" and (1) 4-½" x 16" Cylinder, Color-Coded Hydraulic Hose Grips, All Hydraulic Hoses, Tongue Jack, CAT IV Hitch, Safety Chain (Less Parking Stands)
Rigid: Shear-Bolt Protected, 10,000 lb (Shear Force)Rigid: Shear-Bolt Protected, 10,000 lb (Shear Force)Rigid: Shear-Bolt Protected, 10,000 lb (Shear Force)Rigid: Shear-Bolt Protected, 10,000 lb (Shear Force)Rigid: Shear-Bolt Protected, 10,000 lb (Shear Force)
Pivoting Pathfind'r™ Spring Reset, 2,500 lb
(Not Compatible with Pull Hitch)
Pivoting Pathfind'r™ Spring Reset, 2,500 lb
(Not Compatible with Pull Hitch)
Pivoting Pathfind'r™ Spring Reset, 2,500 lb
(Not Compatible with Pull Hitch)
Pivoting Pathfind'r™ Spring Reset, 2,500 lb
(Not Compatible with Pull Hitch)
Pivoting Pathfind'r™ Spring Reset, 2,500 lb
(Not Compatible with Pull Hitch)
MRD Shank, 1-¼" Thick (Minimum Residue Disturbance), Austempered Wear BarMRD Shank, 1-¼" Thick (Minimum Residue Disturbance), Austempered Wear BarMRD Shank, 1-¼" Thick (Minimum Residue Disturbance), Austempered Wear BarMRD Shank, 1-¼" Thick (Minimum Residue Disturbance), Austempered Wear BarMRD Shank, 1-¼" Thick (Minimum Residue Disturbance), Austempered Wear Bar
HD No-Till Shank, 1" Thick (Low Surface Disturbance), Austempered Wear Bar, Chromium Carbide Shank Side ProtectorsHD No-Till Shank, 1" Thick (Low Surface Disturbance), Austempered Wear Bar, Chromium Carbide Shank Side ProtectorsHD No-Till Shank, 1" Thick (Low Surface Disturbance), Austempered Wear Bar, Chromium Carbide Shank Side ProtectorsHD No-Till Shank, 1" Thick (Low Surface Disturbance), Austempered Wear Bar, Chromium Carbide Shank Side ProtectorsHD No-Till Shank, 1" Thick (Low Surface Disturbance), Austempered Wear Bar, Chromium Carbide Shank Side Protectors
Double K® 2" Chromium Carbide Points (No-Till Shank Only)Double K® 2" Chromium Carbide Points (No-Till Shank Only)Double K® 2" Chromium Carbide Points (No-Till Shank Only)Double K® 2" Chromium Carbide Points (No-Till Shank Only)Double K® 2" Chromium Carbide Points (No-Till Shank Only)
Double K® 7" Wing Ripper PointsDouble K® 7" Wing Ripper PointsDouble K® 7" Wing Ripper PointsDouble K® 7" Wing Ripper PointsDouble K® 7" Wing Ripper Points
Double K® 2-½" Straight Ripper PointDouble K® 2-½" Straight Ripper PointDouble K® 2-½" Straight Ripper PointDouble K® 2-½" Straight Ripper PointDouble K® 2-½" Straight Ripper Point
Low Disturbance Shank Cap (In Lieu of Wing)Low Disturbance Shank Cap (In Lieu of Wing)Low Disturbance Shank Cap (In Lieu of Wing)Low Disturbance Shank Cap (In Lieu of Wing)Low Disturbance Shank Cap (In Lieu of Wing)
(2) 20.5" x 8", Load Range E
(One per Wing)
(2) 20.5" x 8", Load Range E
(One per Wing)
(2) 20.5" x 8", Load Range E
(One per Wing)
(2) 20.5" x 8", Load Range E
(One per Wing)
(2) 20.5" x 8", Load Range E
(One per Wing)
(2) 4 x 16" Smooth Closing Wheels per Shank, Adjustable Spring Tension (Limit Shank Soil Blowout)(2) 4 x 16" Smooth Closing Wheels per Shank, Adjustable Spring Tension (Limit Shank Soil Blowout)(2) 4 x 16" Smooth Closing Wheels per Shank, Adjustable Spring Tension (Limit Shank Soil Blowout)(2) 4 x 16" Smooth Closing Wheels per Shank, Adjustable Spring Tension (Limit Shank Soil Blowout)(2) 4 x 16" Smooth Closing Wheels per Shank, Adjustable Spring Tension (Limit Shank Soil Blowout)
12" Offset Between Shanks12" Offset Between Shanks12" Offset Between Shanks12" Offset Between Shanks12" Offset Between Shanks
OPERATING INFORMATION
 
Recommended Operating Speed (mph/km/h)
Recommended Working Depth
Recommended Tractor Power Range (mph/kw/h)
4835-836F4835-838F4835-840F4835-930F4835-1130F
4 - 7 / 6 - 114 - 7 / 6 - 114 - 7 / 6 - 114 - 7 / 6 - 114 - 7 / 6 - 11
8" - 16" / 20 - 41 cm8" - 16" / 20 - 41 cm8" - 16" / 20 - 41 cm8" - 16" / 20 - 41 cm8" - 16" / 20 - 41 cm
30 - 40 PTO Horsepower per Shank / 22 - 30 kW30 - 40 PTO Horsepower per Shank / 22 - 30 kW30 - 40 PTO Horsepower per Shank / 22 - 30 kW30 - 40 PTO Horsepower per Shank / 22 - 30 kW30 - 40 PTO Horsepower per Shank / 22 - 30 kW

Media