RC 200 Series Commercial Reel Mixers

RC260TK_Sil.png

Outperform Expectations

KUHN Knight RC 200 Series Reel Commercial mixers provide the ultimate versatility, durability and performance. Four models are available in trailer, truck or stationary configurations, and offer capacities ranging from 500 to 950 ft³.

Contact your dealer for pricing

Find a dealer near you

KUHN Knight RC 200 Series Reel Commercial mixers provide superior durability and performance with innovative options that separate them from the competition. For dairy and beef producers mixing rations with high percentages of roughages or distillers grains, this design gives them the ability to efficiently handle a wide range of materials.

 

The Helix® reel, with its open-center design, offers fast, consistent mixing and superior load leveling with any ration. The enhanced reel design optimizes the mixing of wet by-product rations, but through extensive testing has been proven to provide quality performance in all rations. The heavy-duty drive option offers extended life, in even the most extreme use cycles, and provides the ability to mix the heaviest feedstuffs. These features, combined with the versatility and low horsepower requirement that are the hallmark of the reel and auger design, put these RC models at the head of their class! From the popular, multi-purpose trailer models, to the fast, convenient transport offered by truck mounted machines, to stationary models that are ideal for central mixing, there is a mixer to meet the needs of any operation. These machines also offer a low standard loading height for easy loading with skid steers.
RC260_Action_05_MAW.jpg

Your benefits

The Reel Advantage

RC_ReelIllustration.png

Superior Feed Movement

The reel thoroughly mixes rations gently without causing excessive damage to the feed ingredients, preserving precious nutritional value for your herd. The large reel gently lifts material up into the side augers for excellent side-to-side movement. The upper auger moves material rearward, while the lower auger moves material forward for end-to-end mixing. This helps feed continually charge the door during discharge.

Low Fuel Consumption

Quality performance, with the lowest possible input costs is the goal of every operation. The fast, gentle mixing of KUHN Knight reel mixers helps maximize efficiency and minimize expense. The reel and auger design eliminates much of the force and pressure seen with other mixer types, resulting in low horsepower requirements and, correspondingly, less fuel consumption for economical operation.
RC270_Static_03.jpg

Consistent Mixing and Discharge

KUHN Knight reel mixers provide a consistent mix, even with small batches, for a balanced ration from beginning to end. Their quick, even discharge with a more complete cleanout helps save time and maximizes efficiency.
RC295_Action_01.jpg

Simple Feeding

With a high discharge point, these mixers allow for the use of a simple slide tray in most feeding situations. The long tray makes it easy to feed deeper into most bunks while preventing feed loss from the wind. This dependable, low-cost option also results in less maintenance.
RC260_Action_01.jpg

Rugged, Dependable Design with Unique Helix®Reel

RC295_Cutaway_Helix.jpg

The Unique Helix® Reel

The Helix reel has a robust build and has been thoroughly tested to withstand the most challenging conditions. The design of the reel crossbars evens the pressure across the length of the reel for smoother operation. It also engages with the feed more smoothly.

The open-center design eliminates obstructions in the reel and provides superior feed movement and unparalleled mixing action. The benefits are unmistakable, with faster, more consistent mixing, improved load leveling, optimized mixer space utilization and fewer dead spots for the ultimate in ration quality.

A mix bar runs diagonally across the center of the reel to help ensure consistent feed movement throughout the entire mixing chamber. The reel crossbars keep feed moving efficiently around the outside of the chamber. The secondary mechanical mixing action from the mix bar provides a fast and thorough mix even in wet, heavy rations with large amounts of distillers grains.

Heavy-Duty Drive

The reliable heavy-duty roller chain drive runs in oil and has spring tensioned poly idlers for long life. A single-handled latch provides easy access to the oil bath and secure closure to protect the drive system. An improved lip seal keeps oil in, and dirt and debris out to help minimize wear on drive components. Splined drive shafts allow a strong, reliable torque transfer and provide easier sprocket alignment and maintenance.

The heavy-duty drive, standard on RC 270 and RC 295 models, provides heavier chains throughout and a larger diameter countershaft and bearings for added strength and extended life in the toughest mixing conditions and heaviest use cycles. Optional on RC 250 and 260 models.
RC_HD_Drive.jpg

Rugged Undercarriage

Straight-single and walking-tandem bogie axle options are available for trailer models, providing flexibility for varied terrain. Both feature heavy-duty spindles and hubs for maximum durability and long life.
RC_RuggedUndercarriage.jpg

Reinforced Discharge Door and Linkage

The discharge door and linkage have been reinforced to provide reliable service and long life. The slide tray linkage has also been relocated and improved. This change provides increased adjustability to adapt to different feeding situations and eliminates the possibility of the tray extending over center when opened.
RC_Door.jpg

Tailor Your Machine

RC_AugerOptions.png

Auger Options to Meet Your Ration’s Needs

The grain-auger option provides gentle handling of more delicate feeds like flaked corn to maintain ration quality and prevent fines.

The roughage-auger option features notched, sectional flighting with welded-in, self-sharpening, hardened knives for better hay handling.

With the optional Roughage Maxx® system, scalloped knives are added to the lower augers to maximize hay processing. . The knives provide a more consistent particle length and more even blending. The result is a more uniform and palatable ration with reduced sorting for improved feed efficiency.

Multiple Discharge Options

To best suit your feeding needs, you can choose from a slide tray, chain and slat conveyor, 3-auger discharge or a 4-auger discharge to be equipped on your RC 200 Series mixer.

Slide Tray

The high discharge point of the Reel mixers allows use of the simple, dependable, low-cost slide tray in most applications. It has simple hydraulic controls and the long discharge tray reaches deeper into bunks to prevent feed loss from the wind. Magnets are standard on slide tray.

Chain and Slat Conveyor

Rugged chain and slat conveyor options provide the ultimate in durability and long life. Heavy-duty components ensure reliable service and multiple conveyor length options offer unmatched flexibility to match different feeding situations. Available on all models except RC 295.

3-Auger Discharge

The 3-auger discharge allows adjustment for feeding into higher bunks. It has a simple, hydraulic drive that provides smooth, even discharge. Long lasting, poly chute liners help prevent rust and limit wear. The 3-auger discharge comes standard with fixed tip-off and built-in magnets.

4-Auger Discharge

Center-rotating augers bring the feed to the center of the discharge to increase overall capacity and provide a smooth, even discharge for all ration types. The 4-auger discharge comes standard with power tip-off and built-in magnets. RC 250, 260 & 270 models only.

The discharge augers are simple to remove for easy service. Long-lasting, replaceable polyethylene chute liners prevent rust and limit wear.

As with the main auger drive, the discharge auger shafts are splined for a more positive power transfer and longer service life. The simplified drive design, featuring only two chains and a remote grease bank, results in in easy service and maintenance.
RC260_Action_05.jpg

Trailer, Truck & Stationary Models

To suit your operation’s needs, KUHN Knight RC 200 Series mixers are available in trailer, truck-mounted or stationary configurations.

Trailer models are the most popular configuration as they are the most economical and versatile. Being detachable allows the tractor to be used elsewhere on the farm when not in use for feeding.

Truck-mounted models are a suitable option for those that have to feed cows at several different locations, with large travel distances. This option allows a feeder to quickly get from the mixing location to the feed bunk and back again.

Whether mixing wood chips or a ration for your livestock, KUHN Knight RC 200 Series stationary mixers are ideal for maximizing feeding efficiency and mixer throughput on any operation. Stationary mixers are perfect for producers with centralized feed storage and multiple mixers running throughout the day. By incorporating centralized mixing, one loader operator is often able to keep multiple mixers constantly running, greatly increasing mixing capacity and reducing labor. Also, with the addition of delivery boxes, the mixers do not experience the downtime from driving location to location, and in turn do not receive the additional stress which can be seen from constant travel.
RC_Configurations.png

Equipment

RC260_Action_06_MAW.jpg

Specifications

CAPACITY
 
Capacity
Maximum Net load
RC 250 TRAILER RC 260 TRAILER RC 270 TRAILER RC 295 TRAILER RC 250 TRUCK RC 260 TRUCK RC 270 TRUCK RC 295 TRUCK RC 250 STATIONARY RC 260 STATIONARY RC 270 STATIONARY RC 295 STATIONARY
500 ft³ (14.2 m³) 600 ft³ (17 m³) 700 ft³ (19.8 m³) 950 ft³ (26.9 m³) 500 ft³ (14.2 m³) 600 ft³ (17 m³) 700 ft³ (19.8 m³) 950 ft³ (26.9 m³) 500 ft³ (14.2 m³) 600 ft³ (17 m³) 700 ft³ (19.8 m³) 950 ft³ (26.9 m³)
15,000 lbs (6,804 kg) 18,000 lbs (8,165 kg) 21,000 lbs (9,525 kg) 28,500 lbs (12,927 kg) 15,000 lbs (6,804 kg) 18,000 lbs (8,165 kg) 21,000 lbs (9,525 kg) 28,500 lbs (12,927 kg) 15,000 lbs (6,804 kg) 18,000 lbs (8,165 kg) 21,000 lbs (9,525 kg) 28,500 lbs (12,927 kg)
MIXER DIMENSIONS
 
Overall Height
Drop-Side Reduction
Overall Height - Haypan Up
Overall Height - Haypan Down
Overall Length
Mixing Chamber Length
Overall Width - Mixer Only (No Discharge)
Tread Width
RC 250 TRAILER RC 260 TRAILER RC 270 TRAILER RC 295 TRAILER RC 250 TRUCK RC 260 TRUCK RC 270 TRUCK RC 295 TRUCK RC 250 STATIONARY RC 260 STATIONARY RC 270 STATIONARY RC 295 STATIONARY
107" (272 cm) 107" (272 cm) 107" (272 cm) 126" (320 cm) 120" (305 cm) 120" (305 cm) 120" (305 cm) 135" (343 cm) 81" (206 cm) 81" (206 cm) 81" (206 cm) 99" (251 cm)
12" (30 cm) 12" (30 cm) 12" (30 cm) 12" (30 cm) 12" (30 cm) 12" (30 cm) -
22" (56 cm) 22" (56 cm) 22" (56 cm) 22" (56 cm) 22" (55 cm) 22" (55 cm) 22" (55 cm) 22" (55 cm) 22" (56 cm) 22" (56 cm) 22" (56 cm) 22" (56 cm)
8" (20 cm) 8" (20 cm) 8" (20 cm) 8" (20 cm) 8" (20 cm) 8" (20 cm) 8" (20 cm) 8" (20 cm) 8" (20 cm) 8" (20 cm) 8" (20 cm) 8" (20 cm)
242" (615 cm) 272" (691 cm) 302" (767 cm) 294" (747 cm) 189" (480 cm) 219" (556 cm) 249" (632 cm) 247" (627 cm)
168" (427 cm) 198" (503 cm) 228" (579 cm) 216" (549 cm) 168" (427 cm) 198" (503 cm) 228" (579 cm) 216" (549 cm) 168" (427 cm) 198" (503 cm) 228" (579 cm) 216" (549 cm)
102" (259 cm) 102" (259 cm) 102" (259 cm) 120" (305 cm) 102" (259 cm) 102" (259 cm) 102" (259 cm) 120" (305 cm) 114" (290 cm) 114" (290 cm) 114" (290 cm) 126" (320 cm)
101" (257 cm) 101" (257 cm) 101" (257 cm) 110" (279 cm)
MIXING SPECIFICATIONS
 
PTO Drive
PTO Minimum Power Requirement
Reel Speed
Reel Arms
Lower Auger Flighting Diameter
Lower Auger Flighting Thickness - Sectional
Lower Auger Tube - Outside Diameter
Lower Auger Drive Shaft Diameter
Upper Auger Flighting Diameter
Upper Auger Flighting Thickness
Upper Auger Tube - Outside Diameter
Upper Auger Drive Shaft Diameter
Reel Diameter
Reel Driveshaft Diameter
Replaceable Sickle Knives on Upper Auger
Self-Sharpening Knives in Lower Auger Notches
Length - Haypan
Lower Auger Tube - Wall Thickness
Upper Auger Tube - Wall Thickness
Roller Chain Drive
Roller Chain Drive - Heavy Duty
RC 250 TRAILER RC 260 TRAILER RC 270 TRAILER RC 295 TRAILER RC 250 TRUCK RC 260 TRUCK RC 270 TRUCK RC 295 TRUCK RC 250 STATIONARY RC 260 STATIONARY RC 270 STATIONARY RC 295 STATIONARY
540 or 1,000 RPM 540 or 1,000 RPM 1,000 RPM 1,000 RPM
100 hp (75 kW) 110 hp (82 kW) 120 hp (90 kW) 170 hp (127 kW)
5.6 - 6.8 RPM 5.6 - 6.8 RPM 5.6 - 6.8 RPM 4.6 - 5.2 RPM 6.4 RPM 6.4 RPM 6.4 RPM 5.2 RPM 5.7 RPM 5.7 RPM 5.7 RPM 5.2 RPM
5 5 5 5 5 5 5 5 5 5 5 5
24" (61 cm) 24" (61 cm) 24" (61 cm) 28" (71 cm) 24" (61 cm) 24" (61 cm) 24" (61 cm) 28" (71 cm) 24" (61 cm) 24" (61 cm) 24" (61 cm) 28" (71 cm)
5/8" (1.6 cm) 5/8" (1.6 cm) 5/8" (1.6 cm) 5/8" (1.6 cm) 5/8" (1.6 cm) 5/8" (1.6 cm) 5/8" (1.6 cm) 5/8" (1.6 cm) 5/8" (1.6 cm) 5/8" (1.6 cm) 5/8" (1.6 cm) 5/8" (1.6 cm)
6 5/8" (17 cm) 6 5/8" (17 cm) 6 5/8" (17 cm) 8 5/8" (22 cm) 6 5/8" (17 cm) 6 5/8" (17 cm) 6 5/8" (17 cm) 8 5/8" (22 cm) 6 5/8" (17 cm) 6 5/8" (17 cm) 6 5/8" (17 cm) 8 5/8" (22 cm)
3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 5" (12.7 cm) 3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 5" (12.7 cm) 3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 5" (12.7 cm)
22" (56 cm) 22" (56 cm) 24" (61 cm) 28" (71 cm) 22" (56 cm) 22" (56 cm) 24" (61 cm) 28" (71 cm) 22" (56 cm) 22" (56 cm) 24" (61 cm) 28" (71 cm)
1/2" (1.3 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 1/2" (1.3 cm)
6 5/8" (17 cm) 6 5/8" (17 cm) 6 5/8" (17 cm) 8 5/8" (22 cm) 6 5/8" (17 cm) 6 5/8" (17 cm) 6 5/8" (17 cm) 8 5/8" (22 cm) 6 5/8" (17 cm) 6 5/8" (17 cm) 6 5/8" (17 cm) 8 5/8" (22 cm)
3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 4" (10.2 cm) 3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 4" (10.2 cm) 3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 3 1/2" (8.9 cm) 4" (10.2 cm)
70" (178 cm) 70" (178 cm) 70" (178 cm) 84" (213 cm) 70" (178 cm) 70" (178 cm) 70" (178 cm) 84" (213 cm) 70" (178 cm) 70" (178 cm) 70" (178 cm) 84" (213 cm)
5" (13 cm) 5" (13 cm) 5" (13 cm) 8" (20 cm) 5" (13 cm) 5" (13 cm) 5" (13 cm) 8" (20 cm) 5" (13 cm) 5" (13 cm) 5" (13 cm) 8" (20 cm) Tube
Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard
120" (305 cm) 144" (366 cm) 144" (366 cm) 144" (366 cm) 120" (305 cm) 144" (366 cm) 144" (366 cm) 144" (366 cm) 120" (305 cm) 144" (366 cm) 144" (366 cm) 144" (366 cm)
7/16" (1.1 cm) 7/16" (1.1 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 7/16" (1.1 cm) 7/16" (1.1 cm) 1/2" (1.3 cm) 1/2" (1.3 cm) 7/16" (1.1 cm) 7/16" (1.1 cm) 1/2" (1.3 cm) 1/2" (1.3 cm)
7/16" (1.1 cm) 7/16" (1.1 cm) 7/16" (1.1 cm) 1/2" (1.3 cm) 7/16" (1.1 cm) 7/16" (1.1 cm) 7/16" (1.1 cm) 1/2" (1.3 cm) 7/16" (1.1 cm) 7/16" (1.1 cm) 7/16" (1.1 cm) 1/2" (1.3 cm)
80-100-120-140 80-100-120-140 100-120-140-140 100-140-160-200 80-100-120-140 80-100-120-140 100-120-140-140 100-140-160-200 80-100-120-140 80-100-120-140 100-120-140-140 100-140-160-200
100-120-140-140 100-120-140-140 100-120-140-140 100-120-140-140 - - 100-120-140-140 100-120-140-140
TUB & TRAILER CONSTRUCTION
 
Axle Configuration
Hitch
Hubs
Spindle Diameter - Single Axle / Tandem Axle
Unit Weight
Tongue Weight - % Gross
Weighing System
Door Opening Size
Sidewall Thickness
Sidewall Thickness - Auger / Reel
Stainless Steel Side Liner
End Panel Thickness - Front and Rear
Reel Hopper Thickness
Auger Hopper Thickness
Oil Bath Location
Highway Light Kit
RC 250 TRAILER RC 260 TRAILER RC 270 TRAILER RC 295 TRAILER RC 250 TRUCK RC 260 TRUCK RC 270 TRUCK RC 295 TRUCK RC 250 STATIONARY RC 260 STATIONARY RC 270 STATIONARY RC 295 STATIONARY
Single Axle Single or Tandem Axle Single or Tandem Axle Tandem Axle Single Axle Single or Tandem Axle Tandem Axle Tandem Axle
Adjustable Clevis Adjustable Clevis Adjustable Clevis Adjustable Clevis
HD 10-Bolt HD 10-Bolt HD 10-Bolt HD 10-Bolt
4 1/2" (11 cm) / - 4 1/2" (11 cm) / 3 3/8" (9 cm) 4 1/2" (11 cm) / 3 3/8" (9 cm) ­ - / 4 1/2" (11 cm)
16,000 lbs (7,257 kg) 17,200 lbs (7,802 kg) 21,000 lbs (9,525 kg) 25,300 lbs (11,476 kg) 14,950 lbs (6,781 kg) 16,090 lbs (7,298 kg) 18,820 lbs (8,537 kg) 20,250 lbs (9,185 kg) 12,990 lbs (5,892 kg) 14,800 lbs (6,713 kg) 18,500 lbs (8,391 kg) 21,300 lbs (9,662 kg)
9% 11% 12% 12%
4-point 4-point 4-point 4-point 4-point 4-point 4-point 4-point 4-point 4-point 4-point 4-point
42"x22" (107x56 cm) 42"x22" (107x56 cm) 42"x22" (107x56 cm) 48"x26" (122x66 cm) 42"x22" (107x56 cm) 42"x22" (107x56 cm) 42"x22" (107x56 cm) 48"x26" (122x66 cm) 42"x22" (107x56 cm) 42"x22" (107x56 cm) 42"x22" (107x56 cm) 48"x26" (122x66 cm)
1/4" (0.6 cm)
7 GA / 1/4" (0.5 / 0.6 cm) 7 GA / 1/4" (0.5 / 0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 7 GA / 1/4" (0.5 / 0.6 cm) 7 GA / 1/4" (0.5 / 0.6 cm) 7 GA / 1/4" (0.5 / 0.6 cm) 1/4" (0.6 cm) 7 GA / 1/4" (0.5 / 0.6 cm) 7 GA / 1/4" (0.5 / 0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm)
7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm) 7/64" (0.3 cm)
1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.64 cm) 1/4" (0.64 cm) 1/4" (0.64 cm) 1/4" (0.64 cm)
3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm)
3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm)
Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear Rear
Standard Standard Standard Standard Standard Standard Standard Standard
DISCHARGE DIMENSIONS
 
Discharge Hinge Height
Slide Tray - Transport Width
Slide Tray - Maximum Height
Slide Tray - Maximum Reach
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Reach to Tip-Off Pivot
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Reach to Tip-Off End
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Height at Tip-Off Pivot
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Height at Tip-Off End
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Transport Width - Single Axle
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Reach to Tip-Off Pivot
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Reach to Tip-Off End
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Height at Tip-Off Pivot
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Height at Tip-Off End
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Transport Width - Tandem Axle
Side Chain & Slat Conveyor - 24"/36"/48"/60"/72" (61/91/122/152/183 cm) - Maximum Height
Side Chain & Slat Conveyor - 24"/36"/48"/60"/72" (61/91/122/152/183 cm) - Maximum Reach
Side Chain & Slat Conveyor - 24"/36"/48"/60"/72" (61/91/122/152/183 cm) - Transport Width
RC 250 TRAILER RC 260 TRAILER RC 270 TRAILER RC 295 TRAILER RC 250 TRUCK RC 260 TRUCK RC 270 TRUCK RC 295 TRUCK RC 250 STATIONARY RC 260 STATIONARY RC 270 STATIONARY RC 295 STATIONARY
47" (119 cm) 47" (119 cm) 47" (119 cm) 56" (142 cm) 60" (152 cm) 60" (152 cm) 60" (152 cm) 65" (165 cm)
114" (290 cm) 114" (290 cm) 114" (290 cm) 128" (325 cm) 114" (290 cm) 114" (290 cm) 114" (290 cm) 128" (325 cm)
35"(89 cm) 35"(89 cm) 35"(89 cm) 50" (127 cm) 48" (122 cm) 48" (122 cm) 48" (122 cm) 59" (150 cm)
22" (56 cm) 22" (56 cm) 22" (56 cm) 30" (76 cm) 22" (56 cm) 22" (56 cm) 22" (56 cm) 30" (76 cm)
38''/44''/52" (97/112/132 cm) 38''/44''/52" (97/112/132 cm) 38''/44''/52" (97/112/132 cm)
57''/57''/71" (145/145/180 cm) 57''/57''/71" (145/145/180 cm) 57''/57''/71" (145/145/180 cm)
53''/57''/63" (135/145/160 cm) 53''/57''/63" (135/145/160 cm) 53''/57''/63" (135/145/160 cm)
39''/44''/48" (99/112/122 cm) 39''/44''/48" (99/112/122 cm) 39''/44''/48" (99/112/122 cm)
112''/116''/117" (284/295/297 cm) 112''/116''/117" (284/295/297 cm) 112''/116''/117" (284/295/297 cm)
30''/37''/44" (76/94/112 cm) 30''/37''/44" (76/94/112 cm) 30''/37''/44" (76/94/112 cm)
50''/49''/64" (127/124/163 cm) 50''/49''/64" (127/124/163 cm) 50''/49''/64" (127/124/163 cm)
53''/57''/63" (135/145/160 cm) 53''/57''/63" (135/145/160 cm) 53''/57''/63" (135/145/160 cm)
39''/44''/48" (99/112/122 cm) 39''/44''/48" (99/112/122 cm) 39''/44''/48" (99/112/122 cm)
120''/124''/124" (305/315/315 cm) 120''/124''/124" (305/315/315 cm) 120''/124''/124" (305/315/315 cm)
30''/40''/49"/69" (76/102/124/175 cm) 30''/40''/49"/69" (76/102/124/175 cm) 30''/40''/49"/69" (76/102/124/175 cm)
53''/60''/67"/81" (135/152/170/206 cm) 53''/60''/67"/81" (135/152/170/206 cm) 53''/60''/67"/81" (135/152/170/206 cm)
120''/122''/123"/125" (305/310/312/318 cm) 120''/122''/123"/125" (305/310/312/318 cm) 120''/122''/123"/125" (305/310/312/318 cm)
TRUCK SPECIFICATIONS
 
Truck Drive
Cab-Mounted Indicator Mount and Joystick Controls
Steel Rear Bumper
Clearance Light Kit
Mounting
RC 250 TRAILER RC 260 TRAILER RC 270 TRAILER RC 295 TRAILER RC 250 TRUCK RC 260 TRUCK RC 270 TRUCK RC 295 TRUCK RC 250 STATIONARY RC 260 STATIONARY RC 270 STATIONARY RC 295 STATIONARY
Mechanical/ Hydrostatic Mechanical/ Hydrostatic Mechanical/ Hydrostatic Hydrostatic
Standard Standard Standard Standard
Standard Standard Standard Standard
Standard Standard Standard Standard
Factory Mount Option Factory Mount Option Factory Mount Option Factory Mount Option
STATIONARY SPECIFICATIONS
 
Overall Length - With Motor Mount
Length Reduction - Less Motor Mount
Motor Mount to Center of Discharge Door
Overall Height - with Rails and Scales
Discharge Height - With Rails and Scales
Height Reduction - Less Rails and Scales
Electric Motor Horsepower
Electric Motor RPM
Discharge Door Control
Door Flow Control Plates
RC 250 TRAILER RC 260 TRAILER RC 270 TRAILER RC 295 TRAILER RC 250 TRUCK RC 260 TRUCK RC 270 TRUCK RC 295 TRUCK RC 250 STATIONARY RC 260 STATIONARY RC 270 STATIONARY RC 295 STATIONARY
226" (574 cm) 256" (650 cm) 286" (726 cm) 309" (785 cm)
36" (91 cm) 36" (91 cm) 36" (91 cm)
70" (178 cm) 70" (178 cm) 70" (178 cm)
84" (213 cm) 84" (213 cm) 84" (213 cm) 95" (241 cm)
26" (66 cm) 26" (66 cm) 26" (66 cm) 23" (58 cm)
5 1/2" (14 cm) 5 1/2" (14 cm) 5 1/2" (14 cm) 9" (23 cm)
50 hp (37 kW) 60 hp (45 kW) 70 hp (52 kW) 100 hp (75 kW)
1,800 RPM 1,800 RPM 1,800 RPM 1,800 RPM
Manual or Elec/Hyd. Manual or Elec/Hyd. Manual or Elec/Hyd. Manual or Elec/Hyd.
Standard Standard Standard Standard

Media

RC260_Action_01.jpg

Customer Spotlight: RC 200

  • Rob Collins testimonial
    Rob Collins Farmer

    “We’re doing nine loads a day, about 10,000 pounds each load (with the RC 270).”

    Read this review

All the testimonials

Available applications:

Logo KUHN Click & Mix

KUHN Click & Mix

Mixing capacity and ration requirements, along with the dimensions of buildings and feeding areas are important points to consider when choosing a mixer that will be used in everyday feeding operations. This new application is available to help you discover which TMR mixers can meet the needs of your operation.
Download on the App Store

Check all our other KUHN apps to optimize your farm and your life

Get it on Google Play