BTC 100 Series 4-Auger Mixers

btc190tr_sil.png

Redefining Commercial Quality

The efficient material flow of the BTC 100 Series Botec® 4-auger commercial mixers results in fast mixing and a quick, complete cleanout, saving you time and money. Four models are available in truck or trailer configurations, with capacities ranging from 550 to 1,000 ft³.

Contact your dealer for pricing

Find a dealer near you

KUHN Knight BTC 100 Series Botec® 4-auger commercial mixers are ideal for large dairy and feedlot operations. They provide the ultimate ration flexibility to thoroughly mix a wide range of ingredients, including high percentages of byproducts or roughages. The unique Botec design eliminates dead spots for efficient material flow and fast mixing to save you time. A lower horsepower requirement, compared to competitive models, results in less fuel consumption. Multiple discharge options provide fast, even feedout and enhanced reliability from the upgraded auger drive.
MAW_BTC172_Action_02.jpg

Your benefits

The Botec® Advantage

BTC_AugerCutaway.png

The Botec® Advantage

A Quality Ration and Complete Cleanout
The raised lower right auger configuration, along with the close tolerance between the auger flighting and the auger troughs, results in a fast and complete cleanout. The offset upper right auger in combination with the raised lower auger requires less horsepower and provides a faster mix time.

Mix Full or Partial Loads
Due to the cross-mixing action of horizontal auger mixers, Botec® TMR mixers can properly mix batches that fill only a portion of the mixing tub providing you with the versatility to mix any size ration.

Even, Consistent Discharge

The close auger tolerances and raised lower auger design provide a fast, consistent discharge from beginning to the end of unloading. This results in even feed placement across the entire length of the bunk without a delay for mixer cleanout.

Competitive Mixers

Having parallel lower augers creates more force between the augers without increasing mixing capability. Parallel augers also do not transition the feed from right to left as well as if the right auger was raised. This design leads to slow, incomplete cleanout, decreases the mixer's processing ability and increases the horsepower requirements.
Botec_CompetitiveModels.png

Rugged, Dependable Drive

BTC_Drive.jpg

Redesigned with You in Mind

The drive on the BTC 100 Series mixers has been completely redesigned from previous generations to better handle the torque experienced under the heaviest of commercial loads. This includes upgraded planetary gearboxes and a heavy-duty roller chain operating in a fully enclosed oil bath.

Splined shafts and sprockets, along with bolted auger flanges, provide a strong connection and positive power transfer. Heavy-duty bearings are mounted on the outside of the mixing chamber for easy service and long life.

Easy Access Door

The single-handled latch provides easy access to the oil bath. An improved seal keeps oil in, and dirt and debris out, to help minimize wear on drive components and maintain a cleaner appearance.
BTC_EasyAccessDoor.jpg

Enhanced Drive Serviceability

The flanged and bolted augers provide a stronger auger to drive shaft connection. Splined shafts give more positive power transfer and longer service life compared to keyed sprocket-to-shaft connections.
BTC_Drive2.png

Tailor Your Machine

BTC_AugerOptions.png

Auger Options to Meet Your Ration’s Needs

The grain-auger option provides gentle handling of more delicate feeds like flaked corn to maintain ration quality and prevent fines.
 
The roughage-auger option features notched, sectional flighting with welded-in, self-sharpening, hardened knives for better hay handling.  
 
With the Roughage Maxx® system, scalloped knives are added to the lower augers to maximize hay processing. The knives provide a more consistent particle length and more even blending. The result is a more uniform and palatable ration with reduced sorting for improved feed efficiency.

Multiple Discharge Options

To best suit your feeding needs, you can choose from a slide tray, chain and slat conveyor, 3-auger discharge or a 4-auger discharge to be equipped on your BTC 100 Series mixer.

Slide Tray

The side discharge slide tray has simple hydraulic controls and helps guide feed further away from the tire path. Magnets are standard on slide tray.

Chain and Slat Conveyor

Rugged chain and slat conveyor options provide the ultimate in durability and long life. Heavy-duty components ensure reliable service and multiple conveyor length options offer unmatched flexibility to match different feeding situations.

3-Auger Discharge

The 3-auger discharge allows adjustment for feeding into higher bunks. It has a simple, hydraulic drive that provides smooth, even discharge. Long lasting, poly chute liners help prevent rust and limit wear. The 3-auger discharge comes standard with fixed tip-off and built-in magnets.

4-Auger Discharge

Center-rotating augers bring the feed to the center of the discharge to increase overall capacity and provide a smooth, even discharge for all ration types. The 4-auger discharge comes standard with power tip-off and built-in magnets. The discharge augers are simple to remove for easy service. Long-lasting, replaceable polyethylene chute liners prevent rust and limit wear. As with the main auger drive, the discharge auger shafts are splined for a more positive power transfer and longer service life. The simplified drive design, featuring only two chains and a remote grease bank, results in in easy service and maintenance.
BTC172_Action_03.jpg

Trailer & Truck Models

To suit your operation’s needs, KUHN Knight BTC 100 Series mixers are available in a trailer or truck-mounted configuration. Trailer models are the most popular configuration as they are the most economical and versatile. Being detachable allows the tractor to be used elsewhere on the farm when not in use for feeding. Truck-mounted models are a suitable option for those that have to feed cows at several different locations, with large travel distances. This option allows a feeder to quickly get from the mixing location to the feed bunk and back again.
BTC_Configurations.png

Equipment

KUHN products visual

Specifications

CAPACITY
 
Capacity
Capacity with Extensions
Maximum Net load
BTC 155 TRAILER BTC 163 TRAILER BTC 172 TRAILER BTC 190 TRAILER BTC 155 TRUCK BTC 163 TRUCK BTC 172 TRUCK BTC 190 TRUCK
550 ft³ (15.6 m³) 630 ft³ (17.8 m³) 720 ft³ (20.4 m³) 900 ft³ (25.5 m³) 550 ft³ (15.6 m³) 630 ft³ (17.8 m³) 720 ft³ (20.4 m³) 900 ft³ (25.5 m³)
630 ft³ (17.8 m³) 720 ft³ (20.4 m³) 810 ft³ (22.9 m³) 1,000 ft³ (28.3 m³) 630 ft³ (17.8 m³) 720 ft³ (20.4 m³) 810 ft³ (22.9 m³) 1,000 ft³ (28.3 m³)
15,600 lbs (7,075 kg) 18,900 lbs (8,575 kg) 21,600 lbs (9,800 kg) 27,000 lbs (12,250 kg) 15,600 lbs (7,075 kg) 18,900 lbs (8,575 kg) 21,600 lbs (9,800 kg) 27,000 lbs (12,250 kg)
MIXER DIMENSIONS
 
Overall Height
Overall Height - With Extensions
Overall Length
Mixing Chamber Length
Overall Width - Mixer Only (No Discharge)
Tread Width - Single Axle
Tread Width - Tandem Axle
BTC 155 TRAILER BTC 163 TRAILER BTC 172 TRAILER BTC 190 TRAILER BTC 155 TRUCK BTC 163 TRUCK BTC 172 TRUCK BTC 190 TRUCK
Single 106'' (269 cm) / Tandem - Single 106'' (269 cm) / Tandem 114'' (290 cm) Single 114'' (290 cm) / Tandem 114'' (290 cm) Single - / Tandem 130 '' (330 cm) 117'' (297 cm) 117'' (297 cm) 125'' (318 cm) 136'' (345 cm)
Single 114'' (290 cm) / Tandem - Single 108'' (274 cm) / Tandem 116'' (295 cm) Single 122'' (310 cm) / Tandem 122'' (310 cm) Single - / Tandem 138 '' (351 cm) 125'' (318 cm) 125'' (318 cm) 133'' (338 cm) 144'' (366 cm)
267'' ( 678 cm) 291'' (739 cm) 291'' (739 cm) 295'' (749 cm) 215'' (546 cm) 239'' (607 cm) 239'' (607 cm) 242'' (615 cm)
192'' (488 cm) 216'' (549 cm) 216'' (549 cm) 216'' (549 cm) 192'' (488 cm) 216'' (547 cm) 216'' (547 cm) 216'' (547 cm)
96'' (244 cm) 96'' (244 cm) 96'' (244 cm) 101'' (257 cm) 96'' (244 cm) 96'' (244 cm) 96'' (244 cm) 102'' (259 cm)
91'' (231 cm) 91'' (231 cm) 91'' (231 cm) - 96'' (244 cm) 96'' (244 cm) 96'' (244 cm) 96'' (244 cm)
- 106'' (269 cm) 106'' (269 cm) 102'' (259 cm)
MIXING SPECIFICATIONS
 
PTO Minimum Power Requirement
Lower Auger Flighting Diameter
Lower Auger Tube - Outside Diameter
Lower Auger Drive Shaft Diameter
Lower Auger Flighting Thickness - Front / Rear
Upper Auger Flighting Diameter
Upper Auger Flighting Thickness
Upper Auger Tube - Outside Diameter
Upper Auger Drive Shaft Diameter
Lower Auger Tube - Wall Thickness
Upper Auger Tube - Wall Thickness
Roller Chain Drive
BTC 155 TRAILER BTC 163 TRAILER BTC 172 TRAILER BTC 190 TRAILER BTC 155 TRUCK BTC 163 TRUCK BTC 172 TRUCK BTC 190 TRUCK
100 hp (75 kW) 110 hp (82 kW) 120 hp (90 kW) 130 hp (97 kW)
28'' (71 cm) 28'' (71 cm) 28'' (71 cm) 28'' (71 cm) 28'' (71 cm) 28'' (71 cm) 28'' (71 cm) 28'' (71 cm)
8 5/8'' (22 cm) 8 5/8'' (22 cm) 8 5/8'' (22 cm) 8 5/8'' (22 cm) 8 5/8'' (22 cm) 8 5/8'' (22 cm) 8 5/8'' (22 cm) 8 5/8'' (22 cm)
3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm) 4'' (10.2 cm) 3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm) 4'' (10.2 cm)
3/4'' (1.9 cm) / 5/8'' (1.6 cm) 3/4'' (1.9 cm) / 5/8'' (1.6 cm) 3/4'' (1.9 cm) / 5/8'' (1.6 cm) 3/4'' (1.9 cm) / 5/8'' (1.6 cm) 3/4'' (1.9 cm) / 5/8'' (1.6 cm) 3/4'' (1.9 cm) / 5/8'' (1.6 cm) 3/4'' (1.9 cm) / 5/8'' (1.6 cm) 3/4'' (1.9 cm) / 5/8'' (1.6 cm)
28'' (71 cm) 28'' (71 cm) 28'' (71 cm) 28'' (71 cm) 28'' (71 cm) 28'' (71 cm) 28'' (71 cm) 28'' (71 cm)
3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8" (1 cm) 3/8'' (1 cm) 3/8'' (1 cm) 3/8'' (1 cm) 3/8'' (1 cm)
6 5/8'' (16.8 cm) 6 5/8'' (16.8 cm) 6 5/8'' (16.8 cm) 6 5/8'' (16.8 cm) 6 5/8'' (16.8 cm) 6 5/8'' (16.8 cm) 6 5/8'' (16.8 cm) 6 5/8'' (16.8 cm)
3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm) 3 1/2'' (8.9 cm)
1/2'' (1.3 cm) 1/2'' (1.3 cm) 1/2'' (1.3 cm) 1/2'' (1.3 cm) 1/2'' (1.3 cm) 1/2'' (1.3 cm) 1/2'' (1.3 cm) 1/2'' (1.3 cm)
9/16'' (1.4 cm) 9/16'' (1.4 cm) 9/16'' (1.4 cm) 9/16'' (1.4 cm) 9/16'' (1.4 cm) 9/16'' (1.4 cm) 9/16'' (1.4 cm) 9/16'' (1.4 cm)
120 - 140H 120 - 140H 120 - 140H 120 - 140H 120 - 140H 120 - 140H 120 - 140H 120 - 140H
TUB & TRAILER CONSTRUCTION
 
Axle Configuration
Hitch
Unit Weight
Tongue Weight - % Gross
Weighing System
Door Opening Size
Sidewall Thickness
End Panel Thickness - Front and Rear
Auger Hopper Thickness
Highway Light Kit
BTC 155 TRAILER BTC 163 TRAILER BTC 172 TRAILER BTC 190 TRAILER BTC 155 TRUCK BTC 163 TRUCK BTC 172 TRUCK BTC 190 TRUCK
Single axle Single or tandem axle Single or tandem axle Tandem axle Single axle Single or tandem axle Tandem axle Tandem axle
Clevis Clevis Clevis Clevis
17,350 lbs (7,870 kg) 17,600 lbs (7,983 kg) 18,000 lbs (8,165 kg) 22,600 lbs (10,250 kg) 16,100 lbs (7,303 kg) 16,300 lbs (7,394 kg) 16,650 lbs (7,552 kg) 17,600 lbs (7,983 kg)
7% 7% 7% 7%
Four-Point Four-Point Four-Point Four-Point Four-Point Four-Point Four-Point Four-Point
40'' x 31'' (102 x 79 cm) 40'' x 31'' (102 x 79 cm) 40'' x 31'' (102 x 79 cm) 40'' x 31'' (102 x 79 cm) 40'' x 31'' (102 x 79 cm) 40'' x 31'' (102 x 79 cm) 40'' x 31'' (102 x 79 cm) 40'' x 31'' (102 x 79 cm)
Right - 1/4'' (0.6 cm) Left 3/16'' (0.5 cm) Right - 1/4'' (0.6 cm) Left 3/16'' (0.5 cm) Right - 1/4'' (0.6 cm) Left 3/16'' (0.5 cm) Right - 1/4'' (0.6 cm) Left 3/16'' (0.5 cm) Right - 1/4'' (0.6 cm) Left 3/16'' (0.5 cm) Right - 1/4'' (0.6 cm) Left 3/16'' (0.5 cm) Right - 1/4'' (0.6 cm) Left 3/16'' (0.5 cm) Right - 1/4'' (0.6 cm) Left 3/16'' (0.5 cm)
1/4'' (0.6 cm) 1/4'' (0.6 cm) 1/4'' (0.6 cm) 1/4'' (0.6 cm) 1/4'' (0.6 cm) 1/4'' (0.6 cm) 1/4'' (0.6 cm) 1/4'' (0.6 cm)
3/8'' (0.4 cm) 3/8'' (0.4 cm) 3/8'' (0.4 cm) 3/8'' (0.4 cm) 3/8'' (0.4 cm) 3/8'' (0.4 cm) 3/8'' (0.4 cm) 3/8'' (0.4 cm)
Standard Standard Standard Standard
DISCHARGE DIMENSIONS
 
Slide Tray - Transport Width
Slide Tray - Maximum Height
Slide Tray - Maximum Reach
Slide Tray - Single Axle - Maximum Reach
Slide Tray - Single Axle - Maximum Height
Slide Tray - Single Axle - Transport Width
Slide Tray - Tandem Axle - Maximum Reach
Slide Tray - Tandem Axle - Maximum Height
Slide Tray - Tandem Axle - Transport Width
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Maximum Reach to Tip-Off Pivot
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Maximum Reach to Tip-Off End
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Maximum Height at Tip-Off Pivot
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Maximum Height at Tip-Off End
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Transport Width
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Reach to Tip-Off Pivot
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Reach to Tip-Off End
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Height at Tip-Off Pivot
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Single Axle - Maximum Height at Tip-Off End
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Transport Width - Single Axle
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Reach to Tip-Off Pivot
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Reach to Tip-Off End
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Height at Tip-Off Pivot
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Tandem Axle - Maximum Height at Tip-Off End
4-Auger Discharge - 28"/36"/45" (71/91/114 cm) - Transport Width - Tandem Axle
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Maximum Reach
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Maximum Height
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Transport Width
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Single Axle - Maximum Reach
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Single Axle - Maximum Height
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Single Axle - Transport Width
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Tandem Axle - Maximum Reach
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Tandem Axle - Maximum Height
Side Chain & Slat Conveyor - 24"/36"/48" (61/91/122 cm) - Tandem Axle - Transport Width
BTC 155 TRAILER BTC 163 TRAILER BTC 172 TRAILER BTC 190 TRAILER BTC 155 TRUCK BTC 163 TRUCK BTC 172 TRUCK BTC 190 TRUCK
100'' (254 cm) 100'' (254 cm) 100'' (254 cm) 105'' (267 cm)
26'' (66 cm) 26'' (66 cm) 26'' (66 cm) 27'' (69 cm)
2'' (5 cm) 2'' (5 cm) 2'' (5 cm) 7'' (18 cm)
4" (10 cm) 4" (10 cm) 4" (10 cm) -
15'' (38 cm) 15'' (38 cm) 15'' (38 cm) -
100'' (254 cm) 100'' (254 cm) 100'' (254 cm) -
- 0'' (0 cm) 0'' (0 cm) 2'' (5 m)
- 17'' (43 cm) 17'' (43 cm) 20'' (51 cm)
- 106'' (269 cm) 106'' (269 cm) 105'' (267 cm)
10''/17''/24'' (25/43/61 cm) 10''/17''/24'' (25/43/61 cm) 10''/17''/24'' (25/43/61 cm) 15''/22''/29'' (38/56/74 cm)
27''/33''/40'' (69/84/102 cm) 27''/33''/40'' (69/84/102 cm) 27''/33''/40'' (69/84/102 cm) 31''/38''/45'' (79/97/144 cm)
47''/52''/57'' (119/132/145 cm) 47''/52''/57'' (119/132/145 cm) 47''/52''/57'' (119/132/145 cm) 48''/53''/58'' (122/135/147 cm)
43''/48''/53'' (109/122/135 cm) 43''/48''/53'' (109/122/135 cm) 43''/48''/53'' (109/122/135 cm) 44''/49''54'' (112/125/137 cm)
105''/108''/112'' (267/276/285 cm) 105''/108''/112'' (267/276/285 cm) 105''/108''/112'' (267/276/285 cm) 111''/114''/118'' (282/290/300 cm)
13''/19''/26'' (33/48/66 cm) 13''/19''/26'' (33/48/66 cm) 13''/19''/26'' (33/48/66 cm) -
28''/35''/42'' (71/89/107 cm) 28''/35''/42'' (71/89/107 cm) 28''/35''/42'' (71/89/107 cm) -
36''/41''/46'' (91/104/117 cm) 36''/41''/46'' (91/104/117 cm) 36''/41''/46'' (91/104/117 cm) -
30''/35''/40'' (76/89/102 cm) 30''/35''/40'' (76/89/102 cm) 30''/35''/40'' (76/89/102 cm) -
105''/108''/112'' (267/274/284 cm) 105''/108''/112'' (267/274/284 cm) 105''/108''/112'' (267/274/284 cm) -
- 6''/12''/19'' (15/30/48 cm) 6''/12''/19'' (15/30/48 cm) 10''/17''/24'' (25/43/61 cm)
- 21''/28''/35'' (53/71/89 cm) 21''/28''/35'' (53/71/89 cm) 26''/33''/40'' (66/84/102 cm)
- 38''/43''/48'' (96/109/122 cm) 38''/43''/48'' (96/109/122 cm) 42''/46''/51'' (107/117/129 cm)
- 32''/37''/42'' (81/94/107 cm) 32''/37''/42'' (81/94/107 cm) 37''/42''/47'' (94/107/119 cm)
- 110''/113''/117'' (279/287/297 cm) 110''/113''/117'' (279/287/297 cm) 111''/115''/118'' (282/292/300 cm)
14"/24"/34" (36/61/86 cm) 14"/24"/34" (36/61/86 cm) 14"/24"/34" (36/61/86 cm) 18"/28"/38" (46/71/97 cm)
55"/62"/68" (140/157/173 cm) 55"/62"/68" (140/157/173 cm) 55"/62"/68" (140/157/173 cm) 56"/62"/69" (142/157/175 cm)
102"/110"/116" (259/279/295 cm) 102"/110"/116" (259/279/295 cm) 102"/110"/116" (259/279/295 cm) 107"/116"/122" (272/295/310 cm)
16"/26"/36" (41/66/91 cm) 16"/26"/36" (41/66/91 cm) 16"/26"/36" (41/66/91 cm) -
43"/50"/57" (109/127/145 cm) 43"/50"/57" (109/127/145 cm) 43"/50"/57" (109/127/145 cm) -
99"/108"/114" (251/274/290 cm) 99"/108"/114" (251/274/290 cm) 99"/108"/114" (251/274/290 cm) -
- 8"/18"/28" (20/46/71 cm) 8"/18"/28" (20/46/71 cm) 13"/23"/33" (33/58/84 cm)
- 45"/52"/59" (114/132/150 cm) 45"/52"/59" (114/132/150 cm) 49"/56"/63" (124/142/160 cm)
- 107"/115"/121" (272/292/307 cm) 107"/115"/121" (272/292/307 cm) 107"/116"/122" (272/295/310 cm)
TRUCK SPECIFICATIONS
 
Cab-Mounted Indicator Mount and Joystick Controls
Steel Rear Bumper
Clearance Light Kit
BTC 155 TRAILER BTC 163 TRAILER BTC 172 TRAILER BTC 190 TRAILER BTC 155 TRUCK BTC 163 TRUCK BTC 172 TRUCK BTC 190 TRUCK
Standard Standard Standard Standard
Standard Standard Standard Standard
Standard Standard Standard Standard

Media

BTC1190_Static_01.jpg

Available applications:

Logo KUHN Click & Mix

KUHN Click & Mix

Mixing capacity and ration requirements, along with the dimensions of buildings and feeding areas are important points to consider when choosing a mixer that will be used in everyday feeding operations. This new application is available to help you discover which TMR mixers can meet the needs of your operation.
Download on the App Store

Check all our other KUHN apps to optimize your farm and your life

Get it on Google Play