4142_Sil.png

Outstanding Performance & Reliability

KUHN Knight 4100 Series 4-auger mixers are designed for small- to mid-sized cattle operations with features to provide reliable, efficient and affordable mixing. These mixers offer capacities from 360 to 480 ft³, and are available in trailer and truck configurations.

Contact your dealer for pricing

Find a dealer near you

KUHN Knight 4100 Series 4-auger mixers are designed for small- to mid-sized cattle operations with features to provide reliable, efficient and affordable mixing. Whether you’re feeding a higher roughage dairy ration or a feedlot ration with higher levels of grain and byproducts, you can tailor your machine with features and options to best meet your needs. The drive system, undercarriage, box construction and weigh bar system have outstanding serviceability and reliability. The overall superior mixing performance of this machine stands out from the competition. You get genuine KUHN Knight quality with an innovative and streamlined design, durable components and a rugged build to help ensure reliability and long life.
4142_Action_01.jpg

Your benefits

The Botec® Advantage

4000_MixCutaway.png

A Quality Ration and Complete Cleanout

A Quality Ration and Complete Cleanout
The raised lower right auger configuration, along with the close tolerance between the auger flighting and the auger troughs, results in a fast and complete cleanout. The offset upper right auger in combination with the raised lower auger requires less horsepower and provides a faster mix time.

Mix Full or Partial Loads
Due to the cross-mixing action of horizontal auger mixers, Botec TMR mixers can properly mix batches that fill only a portion of the mixing tub providing you with the versatility to mix any size ration.

Even, Consistent Discharge

The close auger tolerances and raised lower auger design provide a fast, consistent discharge from beginning to the end of unloading. This results in even feed placement across the entire length of the bunk without a delay for mixer cleanout.

Splined Auger Shafts

Splined auger shafts allow a strong, reliable torque transfer and provide easier sprocket alignment and maintenance.
4100_SplinedShaft.jpg

Competitive Mixers

Having parallel lower augers creates more force between the augers without increasing mixing capability. Parallel augers also do not transition the feed from right to left as well as if the right auger was raised. This design leads to slow, incomplete cleanout, decreases the mixer's processing ability and increases the horsepower requirements.
Botec_CompetitiveModels.png

Simple, Dependable Design

4100_RearDrive.jpg

Heavy-Duty Rear Drive

The reliable heavy-duty roller chain drive runs in oil and has spring-tensioned poly idlers for long life.

Nylon Auger Bearings

Reliable, externally mounted nylon bearings provide simple maintenance with reduced sensitivity to contamination.
4100_Bearing.png

Discharge Door & Linkage

Large door openings allow for better ration flow and faster feed delivery. The discharge door frame is more rigid and less complex for dependable day-in and day-out operation.
4100_Door.png

4-Point Weigh Bar System

Four-point weigh bar system comes standard as a cost effective and simple weighting system, yet still maintains 99.5% accuracy.
4100_Weighbar.jpg

Tailor Your Machine

4142_Action_01.jpg

Multiple Discharge Options

To best suit your feeding needs, you can choose from a slide tray, chain and slat conveyor or a 3-auger discharge to be equipped on your 4100 Series mixer.

Slide Tray

The side discharge slide tray has simple hydraulic controls and helps guide feed further away from the tire path. Magnets are standard on slide tray.

Chain and Slat Conveyor

Rugged chain and slat conveyor options provide the ultimate in durability and long life. Heavy-duty components ensure reliable service and multiple conveyor length options offer unmatched flexibility to match different feeding situations.

3-Auger Discharge

The 3-auger discharge allows adjustment for feeding into higher bunks. It has a simple, hydraulic drive that provides smooth, even discharge. Long lasting, poly chute liners help prevent rust and limit wear. The 3-auger discharge comes standard with fixed tip-off and built-in magnets.

Trailer & Truck Models

To suit your operation’s needs, KUHN 4100 Series mixers are available in a trailer or truck-mounted configuration. Trailer models are the most popular configuration as they are the most economical and versatile. Being detachable allows the tractor to be used elsewhere on the farm when not in use for feeding. Truck-mounted models are a suitable option for those that have to feed cows at several different locations, with large travel distances. This option allows a feeder to quickly get from the mixing location to the feed bunk and back again.
4142_Action_02.jpg

Equipment

4142_Action_03.jpg

Media

Available applications: 4100

Logo KUHN Click & Mix

KUHN Click & Mix

Mixing capacity and ration requirements, along with the dimensions of buildings and feeding areas are important points to consider when choosing a mixer that will be used in everyday feeding operations. This new application is available to help you discover which TMR mixers can meet the needs of your operation.
Download on the App Store

Check all our other KUHN apps to optimize your farm and your life

Get it on Google Play