GMD Premium Series

GMD280_Sil.png

Cut Clean, Cut with KUHN

KUHN GMD Premium Series mounted disc mowers, with working widths from 7’10” to 10’2”, offer increased durability, more features and simpler operation.

Contact your dealer for pricing

Find a dealer near you

The best-selling hay mowers in the world are renewed with the KUHN GMD Premium Series mounted disc mowers. Replacing the highly popular 100 Series HD machines, these mowers provide increased durability, enhanced features and a cleaner look for years of low maintenance hay production. The rugged 100 Series cutterbar provides a clean cut. Its flat angle helps keep dirt and other contaminants out of the crop while increasing knife life. An optional hydraulic pivot system eliminates the need to get off the tractor when transitioning between field and transport. A Fast-Fit® quick-change system can be installed to speed up knife changes. A more ergonomic, sleek design reduces clutter while simplifying operation. Cut clean, cut with KUHN.
MachineAtWork_GMD280_Action_03.jpg

Your benefits

Clean and Even Cutting

100SeriesCutterbar.jpg

Proven 100 Series Cutterbar

Due to the high reliability, excellent crop cutting, and overall adaptability to varying terrains, the 100 Series cutterbar is a staple in the Premium Series. See for yourself by taking a closer look at what the 100 Series cutterbar has to offer.
  1. Withstands the highest loads: special high-capacity bearings fitted in a one-piece sealed housing are not subject to distortion.
  2. Increased service life: disc pinion shaft bearings endure radial forces for maximum bearing life. This optimum position improves the load balance.
  3. Protection should an obstacle be struck: the Protectadrive® system is designed to protect the cutterbar gear train and minimizes the risk of downtime.
  4. High-wear resistance: knife attachment hardware is fully protected. For added safety, heat-treated steel cups are welded to the disc.
  5. Minimum wear or distortion risks: idler gear fasteners are located in heat treated steel cups. Correct alignment is ensured without the risk of distortion.
  6. Long-term reliability: large-diameter gearwheels in high-tensile forged steel with reinforced teeth.
  7. Perfect sealing: top-quality o-rings used on cutterbar bearing housings for a perfect, leak-free seal.

Heavy-Duty Discs

These discs offer a service life that outmatch all other discs on the market and are adapted to intensive mowing conditions. The GMD Premium Series mowers are equipped with heavy-duty discs, as standard. Beveled knives are standard and ribbed knives are optional.

The shape of the discs allows for a quick transfer of crop rearward, allowing the crop to quickly be formed into a swath. A recut of the grass is therefore avoided. As crop leaves the cutting area, no outside support greatly reduces the chance of crop wrapping.
GMD_HDDiscs.jpg

Swath Wheel

The Premium Series comes standard with an outside swath wheel. The swath wheel improves crop flow by providing more positive engagement of crop to leave the cutterbar, especially in taller crops.
GMD_OuterSwathWheel_02.png

Practical Features to Save Time During Work

GMD_BearingStation.jpg

Protectadrive® Safety

Every minute saved during the hay season is precious. Ultimate protection, from the externally removable Protectadrive disc bearing stations, provides maximum reliability and quick service. In the event of an impact between a disc and an obstacle, the shaft holding the disc can shear just above the bearing. This is thanks to its carefully dimensioned shear groove. As a result, the gear teeth are protected.

Belt Tensioning

Belt tensioning is semi-automatic and the adjustment is done with the same tool. The easy to adjust system keeps the proper tension on the belts to increase belt life. This tool is also used for opening the cover and changing the blades.
GMD_BeltTensioning.jpg

One Tool for All Adjustments

One tool, supplied with the mower and stored in an integrated toolbox, cab perform all of the following tasks:
  • Adjustments of the flotation spring
  • Unlocking the safety cover
  • Belt tension adjustment
  • Replacement of knives (if bolted)
GMD_Tool.jpg

Easily Change to Transport Position

The GMD Premium Series can be pivoted hydraulically into the transport position via an optional pivot cylinder. This means that changing from work to transport mode has never been easier. You will especially appreciate the time saved when working in small fields.
GMD_Transport.jpg

Adaptable to Varying Terrain

GMD_SafetyBreakaway2.jpg

Safety Breakaway Mechanism

Should an obstacle be struck, the safety breakaway causes the mower unit to swing slightly backwards. The impact is significantly reduced. You can reset the device by simply reversing.

Cutterbar Flotation

Flotation of the cutterbar is adjusted by spring tension. A heavier compensating spring ensures optimum ground pressure through a wide range of terrain and contours. Through the design of the mowing unit articulation, mowing of banks and terraces is possible at a tilt angle of up to 35° and down to -25°, depending on the model. Adjustment can easily be done with the provided tool.
GMD280_Action_01.jpg

Smoother Operation on Headlands

To limit the mowing unit lift in headland turn position, a hydraulic shut-off valve is used. This enables smoother operating and increased structure life.
GMD_HydroShutoff.jpg

3-Point Hitch

The hitch design provides increased durability in extreme working conditions. It also includes adjustable lower offsets and the ability to accept Cat. 2/3N quick hitches without the need of an adapter bracket.
GMD_3PointHitch_01.jpg

Equipment

GMD310_Action_01.jpg

Specifications

 GMD 240GMD 280GMD 310
SPECIFICATIONS
Working width 7'10" (2.4 m) 9'2" (2.8 m) 10'2" (3.1 m)
Number of discs 6 HD Discs 7 HD Discs 8 HD Discs
Removable Protectadrive® disc bearing stations Standard Standard Standard
Cutterbar suspension Spring Spring Spring
Suspension travel With spring With spring With spring
Safety breakaway system Mechanical lock as standard Mechanical lock as standard Mechanical lock as standard
Unlocking system from the tractor cab Via rope Via rope Via rope
Mowing angle +35° / -25° +35° / -25° +35° / -30°
Adjustable lower links Standard Standard Standard
Headland turn position Integrated hydraulic cylinder Integrated hydraulic cylinder Integrated hydraulic cylinder
Average swath width 5'7" (1.7 m) 6'7" (2.0 m) 7'11" (2.2 m)
Outside swath wheel Standard Standard Standard
Transport position Vertical folding via hydraulic cylinder with automatic lock Vertical folding via hydraulic cylinder with automatic lock Vertical folding via hydraulic cylinder with automatic lock
PTO speed 540 540 540
Overrunning PTO clutch (free wheel) Standard Standard Standard
Minimum PTO power requirement 45 hp (31 kW) 50 hp (37 kW) 55 hp (41 kW)
Required tractor hydraulic connections 1 SA 1 SA 1 SA
Road lights and signaling Standard Standard Standard
Machine weight approx. 1,350 lbs (613 kg) 1,475 lbs (669 kg) 1,570 lbs (712 kg)
Check chain Standard Standard Standard
Shipping information: 2 machines/crate* - gross total weight 2,815 lbs (1,276 kg) 3,005 lbs (1,363 kg) 3,350 lbs (1,520 kg)

Media

Customer Spotlight: GMD Premium

  • GMD280 Basehoar
    Jared and Kaitlyn Basehoar Farmers

    "After running the mower (GMD 280), I’ve noticed how easy it is to use and how smooth it cuts in order to help us create well-formed windrows which are easy for us to harvest."

    Read this review

All the testimonials

Available applications: GMD Premium

Logo KUHN ForageXpert

KUHN ForageXpert

For a powerful forage harvesting chain. This new application is available to help you find mowers, mower conditioners, tedders and rakes best adapted to your needs. It will help you optimize forage harvesting according to your current or future equipment purchases.
Download on the App Store

Check all our other KUHN apps to optimize your farm and your life

Get it on Google Play