Dominator4855_Sil.png

Maximum Subsoil Fracture

Residue management, soil tilth and level soil surface area are all key factors in yield potential. The Dominator 4855 meets this challenge with 18" shank spacing not available on competitive machines. RTK working widths range from 10’6” to 19’6”.

Contact your dealer for pricing

Find a dealer near you

The KUHN Krause Dominator® 4855 combination primary tillage machine sets new standards for residue management, compaction removal and mixing of residue in one pass. The Dominator® 4855 offers a primary tillage solution that provides optimal subsoil fracture. Working widths range from 10’6” to 19’6” and models are available with 7, 9, 11 or 13 shanks.
Dominator4855_Action02.jpg

Your benefits

Residue Management

Dominator4855_Coulters.jpg

Coulters

The Dominator® 4855 coulter module features ultra-large 25" diameter coulters on 9" spacing for improved residue cutting versus discs. An innovative live hydraulic down pressure system allows the operator to set down pressure to match conditions. With constant down pressure the coulters automatically seek the depth that provides optimal cutting resistance. Coulter gangs are mounted with Rock-Flex bearing arms for added protection. Coulters feature PEER® TILLXTREME™ maintenance-free bearings.

Shank Spacing

A split-the-middle shank pattern is achieved with two ranks of shanks on 18" spacing, none closer than 36" on the same beam. This provides maximum soil fracture and non-stop operation in heavy residue.
4855_ShankSpacing.jpg

Fracture

Dominator4855_Shanks.jpg

Shanks

Choose from all deep-till parabolic shanks, a combination of deep-till and heavy-duty chisel shanks or all heavy-duty chisel shanks, depending on your agronomic needs.

Double K™ Points

Double K ripper points double the wear life of prior KUHN Krause Dominator fabricated steel and carbide-capped ripper points. Solid casting increases durability in rocky conditions. Choose between the 26.5-pound, 7” wing ripper point and the 22-pound, 2.5” straight ripper point.
DoubleK_Dominator.png

Quality Finishing

Dominator4855_RearDiscConditioner_cob.png

Rear Disc Conditioner

The Dominator® 4855 disc conditioner system is hydraulically adjustable to meet varying surface residue requirements. Front blades are 24" diameter smooth disc blades on 18" spacing and rear blades are 24" diameter fluted blades on 12" spacing to reduce clod size and level soil.

Maintenance-Free Bearing Assembly

Discs feature individual Rock-Flex mounts for protection with rear mounts reversed to shed residue for superior performance even in heavy residue conditions. Sealed, angular contact, maintenance-free bearings and a machine-forged spindle with 5-bolt pattern allowing for fast and easy service.
4855MaintenanceFreeBearingAssembly.png

Heavy-Duty 24/7® Conditioning Reel

Choice of heavy-duty round bar or heavy-duty flat bar reel with Peer® TillXtreme™ maintenance-free bearing assemblies mounted on heavy-duty ductile cast bearing arms provides aggressive clod sizing and soil firming.
Dominator_HDRound_HDFlat.png

Equipment

Dominator4855_Action_14.jpg

Specifications

SPECIFICATIONS
 
Transport Width (ft/m)
Transport Height (ft/m)
Frame Type
Number of Shanks
Shank Spacing (in/cm)
Coulter Blade Spacing (in/cm)
Working Width (ft/m)
Approximate Shipping Weight Less Reel Option (lb/kg)
Approximate Shipping Weight with Reel Option (lb/kg)
4855-7 4855-9 4855-11 4855-13
13'10" / 4.2 15'9" / 4.8 14'10" / 4.5 14'10" / 4.5
6'6" / 1.9 6'6" / 1.9 12'3" / 3.7 13'5" / 4.1
Rigid Rigid Folding Folding
7 9 11 13
18 / 46 18 / 46 18 / 46 18 / 46
9 / 23 9 / 23 9 /23 9 / 23
10'6" / 3.2 13'6" / 4.1 16'6" / 5.0 19'6" / 5.9
12,597 / 5 714 15,162 / 6 877 20,621 / 9 354 22,449 / 10 183
13,419 / 6 087 16,105 / 7 305 21,776 / 9 877 23,820 / 10 805
STANDARD EQUIPMENT
 
Hitch Type
Tongue Type
Depth Control
Hydraulics
Coulter Blades
Coulter Gangs
Shanks
Points
Main Frame Wheels
Wing Frame Wheels
Hydraulic Controlled Rear Disc Conditioner
Transport Locks and Safety
4855-7 4855-9 4855-11 4855-13
CAT IV Articulating Ball Hitch for 2" Pin CAT IV Articulating Ball Hitch for 2" Pin CAT IV Articulating Ball Hitch for 2" Pin CAT IV Articulating Ball Hitch for 2" Pin
Mechanical Adjustable, Self-Leveling Tongue Mechanical Adjustable, Self-Leveling Tongue Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue)
Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control Single Point Hydraulic Depth Control
Cylinders with Royal Plate Plus®, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses Cylinders with Royal Plate Plus®, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses Cylinders with Royal Plate Plus®, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses Cylinders with Royal Plate Plus®, Color Coded Hydraulic Hose Grips, All Hydraulic Hoses
25" x 1/4" Smooth 25" x 1/4" Smooth 25" x 1/4" Smooth 25" x 1/4" Smooth
9 inch spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-3/4" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex Bearing Arms 1-1/4" x 2-1/2" 9 inch spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-3/4" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex Bearing Arms 1-1/4" x 2-1/2" 9 inch spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-3/4" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex Bearing Arms 1-1/4" x 2-1/2" 9 inch spacing, Adjustable Constant Flow Hydraulic, Heavy-Duty 6" Bell Diameter Ductile Iron Spools, 1-3/4" Diameter Round Alloy Tie Rod with Maintenance-Free PEER® TILLXTREME™ Bearings, C-Type Rock-Flex Bearing Arms 1-1/4" x 2-1/2"
Combination (3) Spring Reset Parabolic Sub-soil shanks, 3000lb Point Load, 1-1/4" x 4" Shank with Wear Bar, 22" Trip Height, 39" Underframe Clearance, 16" working depth and (4) Heavy Duty Chisel Shanks, 1200lb point load, 1-1/4" x 3" Shank with Wear Bar, 21" Trip Height, 37" Underframe Clearance, 12" Working Depth Combination (5) Spring Reset Parabolic Sub-soil shanks, 3000lb Point Load, 1-1/4" x 4" Shank with Wear Bar, 22" Trip Height, 39" Underframe Clearance, 16" working depth and (4) Heavy Duty Chisel Shanks, 1200lb point load, 1-1/4" x 3" Shank with Wear Bar, 21" Trip Height, 37" Underframe Clearance, 12" Working Depth Combination (5) Spring Reset Parabolic Sub-soil shanks, 3000lb Point Load, 1-1/4" x 4" Shank with Wear Bar, 22" Trip Height, 39" Underframe Clearance, 16" working depth and (6) Heavy Duty Chisel Shanks, 1200lb point load, 1-1/4" x 3" Shank with Wear Bar, 21" Trip Height, 37" Underframe Clearance, 12" Working Depth Combination (7) Spring Reset Parabolic Sub-soil shanks, 3000lb Point Load, 1-1/4" x 4" Shank with Wear Bar, 22" Trip Height, 39" Underframe Clearance, 16" working depth and (6) Heavy Duty Chisel Shanks, 1200lb point load, 1-1/4" x 3" Shank with Wear Bar, 21" Trip Height, 37" Underframe Clearance, 12" Working Depth
Double K® Cast Chromium Carbide, 7 inch Wing, Ripper Point Double K® Cast Chromium Carbide, 7 inch Wing, Ripper Point Double K® Cast Chromium Carbide, 7 inch Wing, Ripper Point Double K® Cast Chromium Carbide, 7 inch Wing, Ripper Point
Four 12.5L x 16 14ply, Walking Beams, Slip-In Spindles 8-Bolt Heavy Duty Hubs Four 12.5L x 16 14ply, Walking Beams, Slip-In Spindles 8-Bolt Heavy Duty Hubs Four 360/65 R17.5, Walking Beams, Slip-In Spindles 8-Bolt Heavy-Duty Hubs Four 360/65 R17.5, Walking Beams, Slip-In Spindles 8-Bolt Heavy-Duty Hubs
Not Applicable Not Applicable One 9.5L x 15" 8-ply per wing 6-Bolt Heavy Duty Bolts One 9.5L x 15" 8-ply per wing 6-Bolt Heavy Duty Bolts
Front Beam: 24" x 6 gauge, Smooth Shallow Concavity Disc Blades, 18" Blade Spacing
Rear Beam: 24 x 6" gauge, Fluted Disc Blades, 12" Blade Spacing, Off Set Design
Front Beam: 24" x 6 gauge, Smooth Shallow Concavity Disc Blades, 18" Blade Spacing
Rear Beam: 24 x 6" gauge, Fluted Disc Blades, 12" Blade Spacing, Off Set Design
Front Beam: 24" x 6 gauge, Smooth Shallow Concavity Disc Blades, 18" Blade Spacing
Rear Beam: 24 x 6" gauge, Fluted Disc Blades, 12" Blade Spacing, Off Set Design
Front Beam: 24" x 6 gauge, Smooth Shallow Concavity Disc Blades, 18" Blade Spacing
Rear Beam: 24 x 6" gauge, Fluted Disc Blades, 12" Blade Spacing, Off Set Design
Hydraulic Valves, Transport and Wing Fold, Slow Moving Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Sign, High-Visibility LED Lighting Hydraulic Valves, Transport and Wing Fold, Slow Moving Sign, High-Visibility LED Lighting
OPTIONAL EQUIPMENT
 
Hitch Type
Tongue Type
Shanks
Shanks
Shanks
Shanks
Points
Tires
Residue Manager
Rear Conditioning Reel
Rear Conditioning Reel
Rear Attachment
4855-7 4855-9 4855-11 4855-13
CAT III Articulating Ball Hitch for 1-1/2" Pin CAT III Articulating Ball Hitch for 1-1/2" Pin CAT V Articulating Ball Hitch for 2-3/4" Pin CAT V Articulating Ball Hitch for 2-3/4" Pin
Guardian Hitch™ (Cushion Tongue) Guardian Hitch™ (Cushion Tongue) Mechanical Adjustable, Self-Leveling Tongue Mechanical Adjustable, Self-Leveling Tongue
All Shear Bolt Sub Soil Shanks - 1-1/4" x 4" Shank Size with Wear Bar, 39" Underframe Clearance, 16" Working Depth All Shear Bolt Sub Soil Shanks - 1-1/4" x 4" Shank Size with Wear Bar, 39" Underframe Clearance, 16" Working Depth All Shear Bolt Sub Soil Shanks - 1-1/4" x 4" Shank Size with Wear Bar, 39" Underframe Clearance, 16" Working Depth All Shear Bolt Sub Soil Shanks - 1-1/4" x 4" Shank Size with Wear Bar, 39" Underframe Clearance, 16" Working Depth
All Spring Reset Sub-Soil Shanks 3,000 lb Point Load, 1-1/4 x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance 16" Working Depth All Spring Reset Sub-Soil Shanks 3,000 lb Point Load, 1-1/4 x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance 16" Working Depth All Spring Reset Sub-Soil Shanks 3,000 lb Point Load, 1-1/4 x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance 16" Working Depth All Spring Reset Sub-Soil Shanks 3,000 lb Point Load, 1-1/4 x 4" Shank Size with Wear Bar, 21" Trip Height, 39" Underframe Clearance 16" Working Depth
Combination (3) Shear Bolt Parabolic Sub-soil shanks, 1-1/4" x 4" Shank with Wear Bar, 39" Underframe Clearance, 16" working depth and (4) Heavy Duty Chisel Shanks, 1200lb point load, 1-1/4" x 3" Shank with Wear Bar, 21" Trip Height, 37" Underframe Clearance, 12" Working Depth Combination (5) Shear Bolt Parabolic Sub-soil shanks, 1-1/4" x 4" Shank with Wear Bar, 39" Underframe Clearance, 16" working depth and (4) Heavy Duty Chisel Shanks, 1200lb point load, 1-1/4" x 3" Shank with Wear Bar, 21" Trip Height, 37" Underframe Clearance, 12" Working Depth Combination (5) Shear Bolt Parabolic Sub-soil shanks, 1-1/4" x 4" Shank with Wear Bar, 39" Underframe Clearance, 16" working depth and (4) Heavy Duty Chisel Shanks, 1200lb point load, 1-1/4" x 3" Shank with Wear Bar, 21" Trip Height, 37" Underframe Clearance, 12" Working Depth Combination (5) Shear Bolt Parabolic Sub-soil shanks, 1-1/4" x 4" Shank with Wear Bar, 39" Underframe Clearance, 16" working depth and (4) Heavy Duty Chisel Shanks, 1200lb point load, 1-1/4" x 3" Shank with Wear Bar, 21" Trip Height, 37" Underframe Clearance, 12" Working Depth
All Heavy Duty Spring Reset Chisel Shanks - 1,200 lb Point Load, 1-1/4" x 3" Shank Size with Wear Bar, 20" Trip Height, 39" Underframe Clearance 12" Working Depth All Heavy Duty Spring Reset Chisel Shanks - 1,200 lb Point Load, 1-1/4" x 3" Shank Size with Wear Bar, 20" Trip Height, 39" Underframe Clearance 12" Working Depth All Heavy Duty Spring Reset Chisel Shanks - 1,200 lb Point Load, 1-1/4" x 3" Shank Size with Wear Bar, 20" Trip Height, 39" Underframe Clearance 12" Working Depth All Heavy Duty Spring Reset Chisel Shanks - 1,200 lb Point Load, 1-1/4" x 3" Shank Size with Wear Bar, 20" Trip Height, 39" Underframe Clearance 12" Working Depth
Double K® 2-1/2" Cast Chromium Carbide, Straight Ripper Point Double K® 2-1/2" Cast Chromium Carbide, Straight Ripper Point Double K® 2-1/2" Cast Chromium Carbide, Straight Ripper Point Double K® 2-1/2" Cast Chromium Carbide, Straight Ripper Point
360/65 R17.5 High Floatation Tires, 8 Bolt Heavy Duty Hubs 360/65 R17.5 High Floatation Tires, 8 Bolt Heavy Duty Hubs Not Applicable Not Applicable
15" Diameter, Individually Mounted Residue Wheels 15" Diameter, Individually Mounted Residue Wheels 15" Diameter, Individually Mounted Residue Wheels 15" Diameter, Individually Mounted Residue Wheels
24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings 24/7® Soil Conditioning with Float Position, Heavy-Duty Flat Bar Spiral Reels, PEER® TILLXTREME™ Maintenance-Free Bearings
None None None None
Rear Hitch Attachment for Use on Machines Without 24/7® Soil Conditioning Reel Rear Hitch Attachment for Use on Machines Without 24/7® Soil Conditioning Reel Rear Hitch Attachment for Use on Machines Without 24/7® Soil Conditioning Reel Rear Hitch Attachment for Use on Machines Without 24/7® Soil Conditioning Reel
OPERATING INFORMATION
 
Recommended Tractor Power Range (PTO hp / kW)
Recommended Working Depth (in/cm)
Recommended Operating Speed (mph/km/h)
4855-7 4855-9 4855-11 4855-13
200 - 250 / 149 - 186 270 - 350 / 201 - 261 375 - 450 / 280 - 336 450 - 525 / 336 - 391
8 - 16 / 20.3 - 40.6 8 - 16 / 20.3 - 40.6 8 - 16 / 20.3 - 40.6 8 - 16 / 20.3 - 40.6
4 - 7 / 6 - 12 4 - 7 / 6 - 12 4 - 7 / 6 - 12 4 - 7 / 6 - 12

Media