Durable Components Provide a Long Life for the Machine
The mechanical drive system uses a 540 rpm PTO. The maintenance-free gearbox controls both the spreading discs and hopper agitators. This simple design requires no hydraulics to operate the discs, perfect for older or smaller tractors.
The simple, mechanical drive allows for a consistent agitator speed of 17 rpm. Slow, stepped agitation prevents fertilizer granule or seed damage.
High-Quality Powder Paint Finish
All KUHN fertilizer spreaders go through a 7-step process that includes mechanical and chemical cleaning as well as top-quality powder paint application and paint baking. This ensures optimum corrosion and scratch resistance, UV resistance, acid resistance and increased abrasion durability. KUHN powder paint will wear longer as the base material is much harder and will corrode far less with the powder paint protectant.
Easily Make Adjustments from the Cab
Additional Equipment for the Axis 30.2 Q
Fertilizer Level Sensors
Fertilizer level sensors can be incorporated in the hoppers to inform the operator and help anticipate when it’s time to refill.
Fertilizer Level Windows
Two openings bring light inside the hopper so the fertilizer level is easily visible through the hopper windows. Fertilizer level sensors can be incorporated in the hoppers (option on Axis Q and W, standard on H-EMC).
To be more flexible during attaching and detaching of your spreader, an optional parking wheel set is available. When mounted to the tractor, the wheels can be stored out of the way.
A wheel speed sensor and cable for ISO 11786 plug are standard so you can maintain a consistent application rate regardless of speed. All machines can also use ground radar or GPS speed signals.
RS 232 Cable
The optional RS 232 cable connects the Quantron control terminal and speed sensor to a GPS control terminal.
|Maximum capacity (with extensions)|
|Maximum hopper payload|
|Working width adjustment|
|Application rate control|
|Fertilizer application rate|
|3-pin battery cable with fuse|
|ISO 11786 cable (to use speed signal from the tractor)|
|Telimat® T25 limiter (for border spreading)|
|Hopper level sensors|
|Spreading discs included in base machine|
|Disc protection guard|
|Required tractor hydraulic connections|
|Hydraulic capacity required|
|Fertilizer identification cards and spread charts|
|Display unit capability|
|Road lights and signaling|
|Empty machine net weight, approx.|
|Axis 30.2 Q|
|112 ft³ (34.1 m³)|
|7,050 lbs (3,198 kg)|
|49 ft³ (14.9 m³)|
|3'5" (1.04 m)|
|9'2" (2.75 m)|
|8'10" (2.69 m)|
|Manual on machine|
|Electronic speed matching|
|Up to 1,100 lbs (500 kg) / min|
|4 sections (2 per side)|
|1 speed sensor as standard|
|Optional (right side only)|
|S4 VXR+ discs with hard coated paddles for working width of 59' - 91' (18 - 28 m)|
|Cat. 2 (not quick hitch compatible)|
|1 SA or DA valve|
|Standard (US imperial and metric)|
|Imperial and metric|
|725 lbs (330 kg)|